1
Replacement parts
Prusa MINI+ riser feet
This is not a fixed STL. SpeakCAD generates the prusa mini+ riser feet to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model riser feet for a Prusa MINI+, 35 mm round pads, 25 mm tall, 20 mm pocket 5 mm deep, 2 mm walls, chamfered base.
What a prusa mini+ riser feet is
Four riser feet for a Prusa MINI+ (base of about 330 × 340 mm) that lift it 25 mm, give the display a better viewing angle and let you tidy cables underneath. Each foot is a 35 mm round pad with a 20 mm pocket 5 mm deep for the stock foot, 2 mm walls and a chamfered base. Print in PETG, or TPU 95A to damp vibration on a thin shelf, pocket up.
The MK4S uses a larger frame and different foot positions, so pick its own feet. Open the ready-made feet in SpeakCAD for free, change the height or pocket in the viewer or the chat, then download the STL.
People also search
prusa mini feet stlprusa mini plus riserprusa mini anti vibration feetmini+ feet 3d print
Questions people ask about a prusa mini+ riser feet
Four riser feet for a Prusa MINI+ (base of about 330 × 340 mm) that lift it 25 mm, give the display a better viewing angle and let you tidy cables underneath. Each foot is a 35 mm round pad with a 20 mm pocket 5 mm deep for the stock foot, 2 mm walls and a chamfered base. Print in PETG, or TPU 95A to damp vibration on a thin shelf, pocket up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model riser feet for a Prusa MINI+, 35 mm round pads, 25 mm tall, 20 mm pocket 5 mm deep, 2 mm walls, chamfered base.
The MK4S uses a larger frame and different foot positions, so pick its own feet. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Oven control knob for D-shaftA cracked oven knob slips on its shaft and makes setting temperature a guess.IKEA Bekvam step stool anti-slip foot replacementA replacement foot for the IKEA Bekvam step stool that covers the raw end of each leg when the original plastic glide falls off or the wood starts scratching…Breville Smart Grinder Pro hopper-lid clipA clip that keeps a Smart Grinder Pro hopper lid (about 110 mm) from rattling off when the grinder is on.Bambu Lab P1S AMS top riser frameA riser frame that lifts an AMS (372 × 280 × 227 mm) about 30 mm above the glass lid of a P1S (389 × 389 × 458 mm), so the four PTFE tubes can bend gently in…Bosch dishwasher folding tine clipA clip that holds a folding tine row of a Bosch or Siemens dishwasher basket in the up position, the part that snaps off after years of hot cycles.De'Longhi Magnifica drip tray floatA replacement float for the drip tray of De'Longhi Magnifica S and other ECAM bean-to-cup machines, the red indicator that pops up when the tray is full.