SpeakCAD for the Prusa MINI

Custom parts for the Prusa MINI: describe them, download G-code sliced for it

Prusa's compact 180 mm cube, a classic in schools and small workshops. SpeakCAD ships the Prusa MINI's own OrcaSlicer profile: describe a part in plain English, watch it render on a virtual 180 x 180 mm bed, edit it by chat, and download a .gcode file, ready for the SD card, the USB stick or the printer's own upload page. Or take the STL or 3MF to your usual slicer. Runs in Safari and Chrome, on a phone or a computer, nothing to install.

Free account, no card: the hand tools and their downloads. Your first AI part is on us too (some accounts confirm it with a card first, nothing charged that day). A download of AI work spends 4 credits and each further new part 3, a small change 2, with Maker at $7.99 a month for 50 credits, every download included.

How it works

From a sentence to the MINI's SD card

The slicer runs on our side with the same profiles OrcaSlicer ships for the Prusa MINI. You choose the print profile and the filament; the printer settings are already right.
1

Describe the part with its measurements

Type what you need, the sizes in millimetres and what it has to fit or attach to. FDM design rules (wall thickness, clearances, a flat base) are applied for you.
2

Check it on the MINI's bed

The part renders on a virtual bed the size of the MINI's. The first render usually appears within a minute or two: a new part gets deeper reasoning through the geometry, and small edits land in seconds. Turn it, tap a face to read a size, open the dimensions panel, and see whether it has overhangs that need supports. Anything wrong is one sentence to fix.
3

Pick the Prusa MINI and its profile

In the download dialog choose the Prusa MINI (0.25 nozzle, 0.4 nozzle, 0.6 nozzle, 0.8 nozzle), one of its print profiles (0.2 mm), a filament, then infill, walls, supports and adhesion. The printer and its last settings are saved to your account.
4

Download and print

You get a .gcode file, ready for the SD card, the USB stick or the printer's own upload page, with the estimated print time and filament weight. Re-slicing a design you already downloaded, with other settings, charges nothing: the G-code costs what the STL costs (included in every plan, 4 credits once without one for a part with AI work in it).

The Prusa MINI profile SpeakCAD slices with

SettingValue
PrinterPrusa MINI (Prusa)
Printable area in the profile180 x 180 x 180 mm
Nozzle variants0.25 nozzle, 0.4 nozzle, 0.6 nozzle, 0.8 nozzle
Layer heights in the print profiles0.2 mm
Filament profilesPLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF, plus the OrcaSlicer filament library
DownloadG-code, or STL and 3MF for your own slicer
SlicerOrcaSlicer, run on our servers with the printer's official profile
Your own STL or 3MFThe online slicer: .gcode with this profile, free with a free account (up to 10 files a day)

Prompts sized for the MINI

Copy one, change the numbers to yours. Each opens in the editor with the text already typed.

“Riser feet for a Prusa MINI+: four 30 mm tall feet with a 4 mm recess for the printer's rubber pads, 40 mm square, 3 mm walls, rounded edges.”

Open this prompt in the editor

“A spool holder for the MINI's frame: fits a 200 mm spool on two 608 bearings 70 mm apart, clips to the 20 mm extrusion, 2.4 mm walls, within 170 mm.”

Open this prompt in the editor

“A cable guide clip for the MINI's bed cable: 25 mm wide, snaps on a 4 mm sheet edge, 8 mm channel with a 1 mm lip.”

Open this prompt in the editor

Why MINI owners do not need a slicer on the phone

Slicing is the step that keeps 3D printing on the desktop: a design made anywhere still has to pass through Bambu Studio, PrusaSlicer or Cura on a computer. SpeakCAD runs OrcaSlicer on its own servers with the profile OrcaSlicer ships for the Prusa MINI, so the phone that typed the description also downloads G-code. The desktop slicer stays the better choice for arranging many parts on one bed or for exotic settings; for one part at a time, the download dialog covers the profile, the filament, infill, walls, supports and adhesion.

Slice your own STL for the MINI

Already have the file, a Printables or MakerWorld download or a part from your own CAD? The online slicer slices an STL or 3MF of up to 50 MB with the same Prusa MINI profile, without the AI: layer heights from 0.2 to 0.2 mm across its nozzles, filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF, infill, supports, walls and bed adhesion. You download a .gcode file, with the print time and filament weight. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day. Open the online slicer.

Parts that fit the MINI

The Prusa MINI's 180 x 180 mm bed and 180 mm height are what the virtual bed in the viewer shows, so a part that looks too big is too big. Ask for a part to be split into two halves with alignment pins when it does not fit, or for a flat print orientation when it would need supports. The examples above and the library parts below all fit.

Parts that fit the first time

The Prusa MINI prints slightly differently from the next printer, which is why holes come out tight and lids loose. Fit Check cuts a five-minute test slice from the interface that must fit, you report too tight, perfect or too loose, and every model after that is built with the clearance your MINI needs. The test slice downloads free as STL or 3MF. How Fit Check works.

Questions

Yes. The Prusa MINI is one of the 380+ printers in the slicer catalog, with 4 nozzle variants and the print and filament profiles OrcaSlicer ships for it. Pick it in the download dialog and download G-code; it is saved to your account for next time.

No. SpeakCAD slices on its servers and gives you a .gcode file. Copy it to the SD card or USB stick the MINI takes, or upload it through the printer's own web page or app. If you prefer your own slicer, download the STL or 3MF instead.

The print profile (layer height and speed presets from the Prusa MINI's profile), the filament profile (the printer's own and the OrcaSlicer library: Generic PLA, PETG, ABS, ASA, TPU, carbon-fibre blends and hundreds of branded filaments), infill, wall count, supports and bed adhesion. Nozzle temperature, bed temperature and speeds come from the profiles you pick.

The virtual bed in the viewer is sized from the Prusa MINI's profile (180 x 180 mm), so you see it before slicing. Ask for the part to be split into two pieces with alignment pins or a dovetail, or for a different orientation; each is one sentence.

G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Re-slicing a design you already downloaded, with other settings, charges nothing. STL and 3MF downloads are always available.

Yes. Upload the STL or 3MF (up to 50 MB) to SpeakCAD's online slicer, pick the Prusa MINI, choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the same OrcaSlicer profile as the editor's G-code download, in the browser on a computer, a Chromebook, an iPad or a phone. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.

Yes. The editor runs in Safari on iPhone and iPad and in Chrome on Android; the file lands in Files or Downloads, ready for the card or the printer's app. The same project opens later on a desktop.

Your next MINI print, shaped or described

Shape the part with the hand tools or type it with its measurements, check it on the bed, download G-code sliced for the Prusa MINI.