1
Organizers & storage
Pegboard rack for Wiha screwdrivers
This is not a fixed STL. SpeakCAD generates the pegboard rack for wiha screwdrivers to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a pegboard screwdriver rack, 340 mm long, eight 9 mm slots on a 42 mm pitch, 25 mm deep shelf, three 6 mm pegs 25.4 mm apart.
What a pegboard rack for wiha screwdrivers is
A pegboard shelf for eight Wiha SoftFinish screwdrivers. Eight 9 mm shaft slots on a 42 mm pitch take handles up to about 40 mm across, the shelf is 25 mm deep and three 6 mm pegs 25.4 mm apart fit standard 1/4 inch pegboard holes. The rack is 340 mm long. Print it on its back in PETG with 1.6 mm walls.
Wiha PicoFinish precision drivers have much thinner shafts and slip through 9 mm slots. Open the ready-made rack in SpeakCAD for free, edit the slot size in the viewer or the chat, then download the STL.
People also search
wiha screwdriver holderpegboard screwdriver rack stlscrewdriver organizer 3d printwiha wall rack
Questions people ask about a pegboard rack for wiha screwdrivers
A pegboard shelf for eight Wiha SoftFinish screwdrivers. Eight 9 mm shaft slots on a 42 mm pitch take handles up to about 40 mm across, the shelf is 25 mm deep and three 6 mm pegs 25.4 mm apart fit standard 1/4 inch pegboard holes. The rack is 340 mm long. Print it on its back in PETG with 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a pegboard screwdriver rack, 340 mm long, eight 9 mm slots on a 42 mm pitch, 25 mm deep shelf, three 6 mm pegs 25.4 mm apart.
Wiha PicoFinish precision drivers have much thinner shafts and slip through 9 mm slots. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Gridfinity bin for HSS drill bits 1 to 10 mmA 3 × 1 Gridfinity bin (125.5 × 41.5 mm, 6 units tall) for a 19-piece metric HSS drill set from 1 to 10 mm in 0.5 mm steps.iPad and iPhone family charging station rack with cable slotsA countertop rack with upright slots for two iPads and three iPhones, so the family devices charge in one place overnight.Whiskas and Felix cat food pouch dispenser boxA gravity dispenser that stacks wet food pouches flat and feeds one from the bottom, so a 40-pouch box of Whiskas, Felix or Sheba lives on the shelf instead…KitchenAid sausage-stuffer tube rackA rack that holds the three KitchenAid stuffer tubes (10, 19, 32 mm) upright by the hub so they dry.Milwaukee Packout crate bottle holderA holder that drops into a Packout crate and parks a 70 mm water bottle plus a 55 mm spray can so they do not tip when you roll.Handheld gaming PC shelf with three slotsA desk shelf that stands three handheld PCs upright on their bottom edge, sized for a Steam Deck OLED (49 mm deep), a Legion Go S (about 44 mm) and a ROG All…