1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Nespresso Lattissima milk-jug drying stand
This is not a fixed STL. SpeakCAD generates the nespresso lattissima milk-jug drying stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nespresso lattissima milk-jug drying stand is
A stand that holds a Lattissima milk jug (about 70 mm ID) upside down so the frother parts dry. The peg is 40 mm and 60 mm tall on a 90 × 70 mm base with a 6 mm drip lip. Print in PETG with 2 mm walls.
The Original-line carousel is for capsules. In SpeakCAD you add the lid, preview the stand in the browser for free, then download the STL.
Example prompt
Create a Lattissima milk-jug stand 90×70×64 mm, 40 mm peg 60 mm tall, 6 mm drip lip, 2 mm PETG.
People also search
lattissima jug stand stlnespresso milk jug dryer 3d printlattissima frother standnespresso milk pitcher holder 3d model
Questions people ask about a nespresso lattissima milk-jug drying stand
A stand that holds a Lattissima milk jug (about 70 mm ID) upside down so the frother parts dry. The peg is 40 mm and 60 mm tall on a 90 × 70 mm base with a 6 mm drip lip. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Lattissima milk-jug stand 90×70×64 mm, 40 mm peg 60 mm tall, 6 mm drip lip, 2 mm PETG.
The Original-line carousel is for capsules. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
IKEA RÅSKOG handle hook pairTwo hooks that clip onto a RÅSKOG handle and hold a towel or a bag, 12 mm snap and a 20 mm hook.Dyson Airwrap barrel drying treeA tree that stands four Airwrap barrels nozzle-up after you wipe them so water does not sit in the magnet.Dreame X40 Ultra mop drying rackA rack that stands two X40 Ultra mop pads (about 160 × 75 mm) on edge after you rinse them, 170 × 42 × 52 mm with two 8 mm slots.Gravity-fed fridge can dispenserA two-lane rack that stores canned drinks in the fridge and rolls the next one forward as you take one.Tassimo T-Disc holder rack for 30 discsAn angled rack that stores Tassimo T-Discs on edge so you can read the barcode side and pick a flavour without digging.Wide mouth Mason jar sprouting lid with mesh 86 mmA sprouting lid for wide mouth Ball, Kerr or Bernardin Mason jars with the 86 mm thread, letting you rinse and drain alfalfa, lentil or broccoli sprouts twic…