1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Makita MAKPAC Type 3 jigsaw insert
This is not a fixed STL. SpeakCAD generates the makita makpac type 3 jigsaw insert to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a makita makpac type 3 jigsaw insert is
An insert that holds an 18V jigsaw plus blades in a MAKPAC Type 3 (about 395 × 295 mm) so the shoe does not rattle. The well is 280 × 90 × 50 mm with a 120 × 20 mm blade tray. Print in PETG with 2 mm walls.
The Type 2 impact-driver insert is a shallower box. In SpeakCAD you name the jigsaw, preview the insert in the browser for free, then download the STL.
Example prompt
Create a MAKPAC Type 3 jigsaw insert, 280×90×50 mm tool well, 120×20 mm blade tray, 2 mm PETG.
People also search
makpac type 3 insert stlmakita jigsaw case insert 3d printmakpac 3 jigsaw organizermakita type 3 tray 3d model
Questions people ask about a makita makpac type 3 jigsaw insert
An insert that holds an 18V jigsaw plus blades in a MAKPAC Type 3 (about 395 × 295 mm) so the shoe does not rattle. The well is 280 × 90 × 50 mm with a 120 × 20 mm blade tray. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a MAKPAC Type 3 jigsaw insert, 280×90×50 mm tool well, 120×20 mm blade tray, 2 mm PETG.
The Type 2 impact-driver insert is a shallower box. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Pocket-hole plug cutter guide 9.5 mmA guide that holds a 9.5 mm plug cutter square to a board edge so Kreg-style plugs come out round.Pipe-clamp jaw pads for 3/4 inch pipeJaw pads that slip over 3/4 inch pipe-clamp heads, 50 × 30 mm faces with 1 mm TPU.Milwaukee Packout M18 battery railA rail that mounts four M18 batteries on the side of a Packout rolling box so spares are not in a tote.Prusa CORE One purge bucketA bucket that sits under a CORE One purge chute and holds 80 × 50 × 40 mm of waste so poop is not on the desk.Angle grinder cutting guide fenceStraight cuts with a 115 mm angle grinder are hard to freehand, and this guide fence clamps to the workpiece and gives the guard a straight edge to ride along.Festool Domino DF 500 offset spacer set for shelf jointsA set of stepped spacers that sit under the fence of a Festool Domino DF 500 so mortises land at a fixed offset from the edge for shelf pins, drawer dividers…