1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Logitech Pebble 2 combo tray
This is not a fixed STL. SpeakCAD generates the logitech pebble 2 combo tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a logitech pebble 2 combo tray is
A tray that parks a Pebble 2 mouse (about 107 × 59 × 27 mm) and Pebble 2 keyboard so a travel pair stays together. The plate is 320 × 90 × 16 mm with a 109 × 61 mm mouse well and a 280 × 20 mm keyboard slot. Print as two PLA halves.
The MX Anywhere 4 travel case is a different mouse. In SpeakCAD you add a USB receiver well, preview the tray in the browser without paying, then download the STL.
Example prompt
Model a Pebble 2 combo tray 320×90×16 mm, 109×61 mm mouse well, 280×20 mm keyboard slot, two PLA halves, 1.6 mm walls.
People also search
pebble 2 tray stllogitech pebble 2 holder 3d printpebble 2 keyboard mouse dockpebble 2 combo stand 3d model
Questions people ask about a logitech pebble 2 combo tray
A tray that parks a Pebble 2 mouse (about 107 × 59 × 27 mm) and Pebble 2 keyboard so a travel pair stays together. The plate is 320 × 90 × 16 mm with a 109 × 61 mm mouse well and a 280 × 20 mm keyboard slot. Print as two PLA halves.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Pebble 2 combo tray 320×90×16 mm, 109×61 mm mouse well, 280×20 mm keyboard slot, two PLA halves, 1.6 mm walls.
The MX Anywhere 4 travel case is a different mouse. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPad Air 13-inch M3 Magic Keyboard riserA 28 mm riser that lifts a 13-inch iPad Air M3 in its Magic Keyboard so a USB-C hub fits underneath.Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.Sliding webcam privacy cover for laptopA thin adhesive frame with a sliding shutter that covers a laptop camera when you are not on a call.Focusrite Scarlett 2i2 4th Gen angled desk standA desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…Garmin Instinct 3 charger-clip dockA dock that holds an Instinct 3 on its clip charger at 20 degrees, 48 mm nest.Mac mini M4 under-monitor shelfA shelf that hides a Mac mini M4 (about 127 × 127 × 50 mm) under a monitor with 20 mm side vents and a 16 mm power/Thunderbolt cutout at the back.