1
Hobby & gaming
Line 6 HX Stomp pedalboard riser
This is not a fixed STL. SpeakCAD generates the line 6 hx stomp pedalboard riser to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a riser for a Line 6 HX Stomp, 180×129 mm top with 1 mm velcro recess, 25 mm rear, 15 mm front, 40×15 mm cable channel underneath.
What a line 6 hx stomp pedalboard riser is
A riser for a Line 6 HX Stomp (about 178 × 127 × 64 mm) so its three footswitches sit above the pedals in front. The top is 180 × 129 mm with a 1 mm hook-and-loop recess, the riser is 25 mm tall at the back and 15 mm at the front, and a 40 × 15 mm channel runs under it for the power lead and patch cables. Print in two halves in PETG and bolt them with M3 screws.
The HX Stomp XL is far wider (about 295 mm), so this riser only suits the compact model. Open the ready-made model in SpeakCAD for free, adjust any millimetre, then download the STL.
People also search
hx stomp riser stlline 6 hx stomp pedalboard riser 3d printhx stomp standmulti effects riser
Questions people ask about a line 6 hx stomp pedalboard riser
A riser for a Line 6 HX Stomp (about 178 × 127 × 64 mm) so its three footswitches sit above the pedals in front. The top is 180 × 129 mm with a 1 mm hook-and-loop recess, the riser is 25 mm tall at the back and 15 mm at the front, and a 40 × 15 mm channel runs under it for the power lead and patch cables. Print in two halves in PETG and bolt them with M3 screws.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a riser for a Line 6 HX Stomp, 180×129 mm top with 1 mm velcro recess, 25 mm rear, 15 mm front, 40×15 mm cable channel underneath.
The HX Stomp XL is far wider (about 295 mm), so this riser only suits the compact model. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Hot Wheels wall display rack for carded carsA wall rack for unopened Hot Wheels and Matchbox mainlines still on their blister cards, which measure 108 x 165 mm with the blister sticking out about 35 mm.DualSense Edge back-paddle restA rest that holds a DualSense Edge face-down without bending the back paddles, two 8 mm clearance wells.Nintendo Switch 2 Pro Controller standA stand that parks a Switch 2 Pro Controller (about 160 × 110 × 60 mm) at 20 degrees with a 14 mm USB-C slot so it charges on a shelf.Xbox wireless controller wall rack for fourA wall rack for four Xbox Wireless Controllers (153 × 61 × 102 mm) that holds each pad on a 36 mm wide arm, 52 mm deep, with a 6 mm lip at the tip, arms 165…Roland AIRA Compact stacking standA two-tier stand for Roland AIRA Compact units (about 188 × 106 × 36 mm each, like the T-8, J-6, S-1 and E-4).Tripod phone clamp with quarter-inch threadA phone clamp turns any tripod into a video rig, and a printed one can be sized for a phone in a thick case that commercial clamps refuse.