Steam Deck OLED dock stand with USB-C cutout
A desk stand that holds a Steam Deck OLED (298 x 117 x 49 mm) at a 15 degree lean while a USB-C hub or the official dock's cable stays plugged into the top port. The cradle is 302 mm wide with a 52 mm deep channel and 0.5 mm clearance around the grips, a rear 20 mm cable cutout so the USB-C lead can drop straight down behind the console, and a 60 x 25 mm pocket in the base that swallows a compact hub such as a JSAUX or Anker dock. Soft 3 mm fillets on every contact edge protect the shell, and the part prints on its back with 2 mm walls and 15 percent infill.
Downloaded stands rarely account for the specific hub you own. Tell SpeakCAD the hub footprint and cable exit you need, preview the stand in the browser at no charge, tweak the lean angle or add ventilation slots in the chat, then download the STL.
Design a Steam Deck OLED dock stand 320 x 120 x 70 mm with a 302 mm wide, 52 mm deep cradle at 15 degrees, 0.5 mm clearance, a 20 mm rear USB-C cable cutout, a 60 x 25 x 15 mm pocket for a USB-C hub in the base, 3 mm fillets and 2 mm walls.