1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Hobby & gaming
Nintendo Switch 2 Joy-Con charging grip stand
This is not a fixed STL. SpeakCAD generates the nintendo switch 2 joy-con charging grip stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nintendo switch 2 joy-con charging grip stand is
A desk stand that holds a Switch 2 Joy-Con charging grip (about 155 × 110 × 45 mm) upright with the USB-C port at the bottom open. Two 32 mm saddles catch the grips, a 14 mm cable slot drops through the base, and a 20 degree lean keeps the face buttons visible. Print in one piece in PLA with 2 mm walls.
Switch OLED grip stands are too narrow for the Switch 2's larger Joy-Con. In SpeakCAD you measure the grip, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a Switch 2 Joy-Con grip stand 160×80×50 mm with two 32 mm saddles, 20 degree lean, 14 mm USB-C slot through the base and 2 mm walls.
People also search
switch 2 joy-con grip stand stlnintendo switch 2 charging grip holderswitch 2 controller stand 3d printswitch 2 joycon dock 3d model
Questions people ask about a nintendo switch 2 joy-con charging grip stand
A desk stand that holds a Switch 2 Joy-Con charging grip (about 155 × 110 × 45 mm) upright with the USB-C port at the bottom open. Two 32 mm saddles catch the grips, a 14 mm cable slot drops through the base, and a 20 degree lean keeps the face buttons visible. Print in one piece in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Switch 2 Joy-Con grip stand 160×80×50 mm with two 32 mm saddles, 20 degree lean, 14 mm USB-C slot through the base and 2 mm walls.
Switch OLED grip stands are too narrow for the Switch 2's larger Joy-Con. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Citadel paint pot rack for 26 mm potsA three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degr…Yoto Player Mini wall dockA wall dock that holds a Yoto Mini and four cards in 2 mm slots, 80 × 40 × 60 mm.Steam Deck 2 travel-dock cable blockA block that holds a USB-C hub and the Deck 2 charger in a 160 × 80 × 30 mm travel case with 0.4 mm clearance.Sony FX30 cage NATO-rail stopA stop that clips onto an FX30 cage NATO rail (about 50 mm) so a handle does not slide off.Game controller stand for two padsA controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed.Nintendo Switch game cartridge case for 24 cardsA slim two-part case with a sliding lid that holds 24 Nintendo Switch game cards in a 6 by 4 grid.