1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA SKOGSTA table cable-clip pair
This is not a fixed STL. SpeakCAD generates the ikea skogsta table cable-clip pair to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea skogsta table cable-clip pair is
A pair of clips that grab a SKOGSTA table apron (about 30 mm) and park a laptop charger so it does not hang in the walkway. The saddle is 6.5 mm and the jaws span 32 mm. Print two in PETG with 1.6 mm walls.
The LACK apron clip is shallower. Tell SpeakCAD charger diameter, preview a clip in the browser at no cost, then download the STL.
Example prompt
Design SKOGSTA table cable clips, 6.5 mm saddle, 32 mm jaws, PETG, pair.
People also search
skogsta cable clip stlikea skogsta cord holder 3d printskogsta table tidyskogsta charger clip 3d model
Questions people ask about a ikea skogsta table cable-clip pair
A pair of clips that grab a SKOGSTA table apron (about 30 mm) and park a laptop charger so it does not hang in the walkway. The saddle is 6.5 mm and the jaws span 32 mm. Print two in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design SKOGSTA table cable clips, 6.5 mm saddle, 32 mm jaws, PETG, pair.
The LACK apron clip is shallower. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Elgato Stream Deck Neo monitor-lip mountA lip mount that hangs an Elgato Stream Deck Neo (about 140 × 85 × 20 mm) under a 4–32 mm monitor bezel.Raspberry Pi 500+ vertical standA vertical stand that holds a Pi 500+ on its side so the ports stay clear, 18 × 290 mm slot.iPad Pro 13-inch M4 folio desk easelA low easel that holds a 13-inch iPad Pro M4 (about 281 × 215 × 5.1 mm) in its Smart Folio at 25 degrees for drawing, with a 218 mm ledge, a 10 mm Apple Penc…IKEA ALEX monitor-riser 60 mm grommetA 60 mm round grommet for a homemade ALEX monitor riser so cables drop behind the drawers instead of over the front.Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…