1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
IKEA PAX 60 cm drawer divider
This is not a fixed STL. SpeakCAD generates the ikea pax 60 cm drawer divider to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea pax 60 cm drawer divider is
A divider that splits a 60 cm PAX/KOMPLEMENT drawer (about 564 mm internal) into two 280 mm wells for folded tees. The wall is 560 × 80 × 2.4 mm with a 6 mm top lip and 0.3 mm side clearance. Print standing on the lip in PETG.
The PAX clothes-rail hook is for hangers, not drawers. In SpeakCAD you pick 50 or 75 cm, preview the divider in the browser without paying, then download the STL.
Example prompt
Model a PAX 60 cm drawer divider 560×80×2.4 mm with a 6 mm top lip, 0.3 mm side clearance, PETG.
People also search
pax drawer divider stlikea pax 60cm organizer 3d printkomplement drawer dividerpax drawer split 3d model
Questions people ask about a ikea pax 60 cm drawer divider
A divider that splits a 60 cm PAX/KOMPLEMENT drawer (about 564 mm internal) into two 280 mm wells for folded tees. The wall is 560 × 80 × 2.4 mm with a 6 mm top lip and 0.3 mm side clearance. Print standing on the lip in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a PAX 60 cm drawer divider 560×80×2.4 mm with a 6 mm top lip, 0.3 mm side clearance, PETG.
The PAX clothes-rail hook is for hangers, not drawers. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Apple Pencil Pro desk tray with USB-C adapter pocketA desk tray that stores an Apple Pencil Pro or 2nd generation (166 mm long, 8.9 mm across) in a half-round groove, with a second groove for the shorter Apple…Tesla Model 3 center console organizer tray insertA tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a su…Framework Laptop 16 GPU module storage trayA padded tray that stores a Framework 16 GPU module (about 150 × 80 × 20 mm) plus two expansion cards in labelled 32 × 14 mm slots.KitchenAid sausage-stuffer tube rackA rack that holds the three KitchenAid stuffer tubes (10, 19, 32 mm) upright by the hub so they dry.IKEA BROR shelf end-stop pairA pair of end stops that keep bins from sliding off a BROR shelf (about 85 or 110 cm) when you roll the unit.Stackable drawer organizer tray with dividersA shallow open tray that drops into a desk or kitchen drawer and splits it into compartments for pens, batteries, clips and other loose items.