1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA MALM desk under-cable tray
This is not a fixed STL. SpeakCAD generates the ikea malm desk under-cable tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea malm desk under-cable tray is
A tray that screws under a MALM desk (about 140 or 151 cm) and holds a power strip plus laptop brick so cables are not on the floor. The tray is 300 × 80 × 40 mm with two 4.5 mm holes on 200 mm centres and a 20 mm rear drop. Print as two PETG halves.
The ALEX grommet is a hole, not a tray. In SpeakCAD you measure the underside, preview the tray in the browser at no cost, then download the STL.
Example prompt
Design a MALM under-desk cable tray 300×80×40 mm, two 4.5 mm holes on 200 mm centres, 20 mm rear drop, two PETG halves, 2 mm walls.
People also search
malm cable tray stlikea malm desk cable holder 3d printmalm under desk traymalm power strip tray 3d model
Questions people ask about a ikea malm desk under-cable tray
A tray that screws under a MALM desk (about 140 or 151 cm) and holds a power strip plus laptop brick so cables are not on the floor. The tray is 300 × 80 × 40 mm with two 4.5 mm holes on 200 mm centres and a 20 mm rear drop. Print as two PETG halves.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MALM under-desk cable tray 300×80×40 mm, two 4.5 mm holes on 200 mm centres, 20 mm rear drop, two PETG halves, 2 mm walls.
The ALEX grommet is a hole, not a tray. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iMac 24 M4 Magic accessory shelfA 16 mm shelf that sits behind a 24-inch iMac M4 stand and holds a Magic Keyboard, Magic Mouse and Magic Trackpad so the desk in front stays empty.Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.Two-piece tablet stand with adjustable angleA cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.Anker 737 power bank desk cradle with cable channelA cradle that keeps the Anker 737 Power Bank (PowerCore 24K) standing upright on a desk with its charge cable plugged in and its display readable.IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.MacBook Air 15-inch M4 clamshell standA clamshell stand for a 15-inch MacBook Air M4 (about 11.5 mm closed, 340 mm wide) that lifts the hinge 20 mm so air can exit and a USB-C hub can sit underne…