1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA LACK side-table cable clip
This is not a fixed STL. SpeakCAD generates the ikea lack side-table cable clip to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea lack side-table cable clip is
A clip that grabs a LACK side-table apron (about 50 mm) and parks a lamp cable so it does not show from the sofa. The saddle is 6.5 mm ID and the jaws span 18 mm. Print in PETG with 1.6 mm walls.
The square grommet needs a drilled hole. Tell SpeakCAD apron thickness, preview the clip in the browser at no cost, then download the STL.
Example prompt
Design a LACK side-table cable clip, 6.5 mm saddle, 18 mm jaws, 1.6 mm PETG.
People also search
lack table cable clip stlikea lack lamp cord clip 3d printlack side table tidylack apron cable holder 3d model
Questions people ask about a ikea lack side-table cable clip
A clip that grabs a LACK side-table apron (about 50 mm) and parks a lamp cable so it does not show from the sofa. The saddle is 6.5 mm ID and the jaws span 18 mm. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a LACK side-table cable clip, 6.5 mm saddle, 18 mm jaws, 1.6 mm PETG.
The square grommet needs a drilled hole. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA ALEX desk 80 mm round grommetAn 80 mm round grommet for a drilled ALEX desk top so monitor and laptop cables drop into the drawer stack.Steam Deck 2 JSAUX dock cable combA comb that sits behind a JSAUX-style Deck 2 dock and separates HDMI, USB-C and power so they do not unplug when you grab the Deck.Garmin Fenix and Forerunner charging cable dock standA desk dock that holds the Garmin four-pin charging plug pointing upward, so a Fenix 7 (47 mm case) or Forerunner 265 (46.1 mm case) drops onto the connector…iPad Pro 11 M5 Magic Keyboard riserA two-piece riser that lifts an 11-inch iPad Pro M5 in its Magic Keyboard (about 250 × 178 × 16 mm closed) by 40 mm so a USB-C hub can sit underneath.Universal Audio Volt 1 desk standA 15 degree stand for a Volt 1 with a 14 mm USB slot.MacBook Pro M4 left-side SD shelfA clip-on shelf that hangs from the left edge of a 14 or 16-inch MacBook Pro M4 and holds an SD reader flush with the HDMI port.