1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA HEMNES nightstand 35 mm cable grommet
This is not a fixed STL. SpeakCAD generates the ikea hemnes nightstand 35 mm cable grommet to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea hemnes nightstand 35 mm cable grommet is
A 35 mm grommet that drops into a drilled HEMNES nightstand top so a lamp and phone cable pass without a raw hole. The flange is 45 mm, the barrel is 20 mm tall, and a 8 mm slot opens to the back. Print in PETG with 1.6 mm walls.
The LACK 60 mm square grommet is a different table. Describe top thickness in SpeakCAD, preview the grommet in the browser at no cost, then download the STL.
Example prompt
Design a HEMNES 35 mm cable grommet, 45 mm flange, 20 mm barrel, 8 mm rear slot, 1.6 mm PETG.
People also search
hemnes grommet stlikea hemnes cable hole 3d printhemnes nightstand grommet 35mmhemnes cable cover 3d model
Questions people ask about a ikea hemnes nightstand 35 mm cable grommet
A 35 mm grommet that drops into a drilled HEMNES nightstand top so a lamp and phone cable pass without a raw hole. The flange is 45 mm, the barrel is 20 mm tall, and a 8 mm slot opens to the back. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a HEMNES 35 mm cable grommet, 45 mm flange, 20 mm barrel, 8 mm rear slot, 1.6 mm PETG.
The LACK 60 mm square grommet is a different table. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Magic Keyboard with Numeric Keypad angled trayA 6 degree tray for the Magic Keyboard with Numeric Keypad (about 418 × 115 × 11 mm) so the larger board matches a Magic Trackpad wedge.Bose QC Ultra Earbuds charging wellA well that parks a QC Ultra Earbuds case (about 66 × 30 × 27 mm) at 15 degrees so the lid faces up on a nightstand.Slim bookend pair with anti-slip baseA pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf.Pixel 10 Pro desk stand with USB-C passthroughA low desk cradle for a Google Pixel 10 Pro (about 153 × 72 × 8.5 mm) that holds the phone at 55 degrees with a 14 mm rear slot so a USB-C cable stays plugge…COROS Vertix 2S charger dockA dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest.Studio Display tilt-stop wedgeA 12 mm wedge that sits under a Studio Display stand so the screen cannot droop below 10 degrees on a polished desk.