1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
IKEA BESTÅ 30 mm leg riser
This is not a fixed STL. SpeakCAD generates the ikea bestå 30 mm leg riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea bestå 30 mm leg riser is
A 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit. The boss is 22 mm across with a 10 mm hex and a 4 mm rubber-foot recess. Print four in PETG with 2.4 mm walls.
The glass-door bump is a different BESTÅ part. Describe mop height in SpeakCAD, preview a riser in the browser without paying, then download the STL.
Example prompt
Model a BESTÅ 30 mm leg riser, M8 thread, 22 mm boss, 10 mm hex, 4 mm foot recess, PETG, set of four.
People also search
besta leg riser stlikea besta 30mm feet 3d printbesta mop clearance riserbesta leg extension 3d model
Questions people ask about a ikea bestå 30 mm leg riser
A 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit. The boss is 22 mm across with a 10 mm hex and a 4 mm rubber-foot recess. Print four in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a BESTÅ 30 mm leg riser, M8 thread, 22 mm boss, 10 mm hex, 4 mm foot recess, PETG, set of four.
The glass-door bump is a different BESTÅ part. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Oven control knob for D-shaftA cracked oven knob slips on its shaft and makes setting temperature a guess.Ortlieb QL2.1 pannier hook insert replacementOrtlieb Back-Roller and Sport-Roller panniers use QL2.1 hooks with small plastic inserts that adapt the hook to rack tubing of 8, 10, 12 or 16 mm; the insert…Eheim filter intake pipe suction cup clip replacementA replacement clip that holds the intake and outflow pipes of an Eheim Classic or Professionel canister filter against the aquarium glass when the original c…IKEA BESTÅ glass-door soft bumpA 8 mm silicone-style bump that sticks on a BESTÅ glass door so it does not slap the frame.IKEA TROFAST frame 35 mm caster riserA 35 mm riser that adds a 40 mm caster under a TROFAST frame so the unit rolls to the next room.IKEA KALLAX insert-drawer stopA stop that keeps a KALLAX drawer insert (33 cm cube) from being pulled out of the cube.