Replacement parts

Oven control knob for D-shaft

A cracked oven knob slips on its shaft and makes setting temperature a guess. Most cookers use a 6 mm D-shaped shaft, so a replacement knob is a 40 mm diameter, 25 mm tall dome with a D bore 6.2 mm across and 4.7 mm to the flat, a pointer mark on the rim and finger grips around the skirt. A 3 mm wall plus a 10 mm deep boss keeps it rigid. Print it upside down in ABS, ASA or PETG, since the panel gets warm.

SpeakCAD builds the knob around your shaft profile and matches the diameter and height of the knobs still on the appliance so the set looks uniform. Ask for a chrome-style ring recess or a longer boss and see it instantly. The preview is free in the browser.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create an oven knob 40 mm diameter and 25 mm tall with a domed top, twelve finger grooves around the skirt, 3 mm walls, a central boss 10 mm deep with a D bore 6.2 mm diameter and 4.7 mm across the flat, and a 2 mm pointer line.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Vacuum cleaner hose end cuffThe cuff where a vacuum hose meets the wand or floor head cracks from years of twisting, and once it splits the suction leaks away.Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.Blender lid center capThe removable center cap of a blender lid gets lost or cracked, and without it every smoothie splashes the counter.Headset spacer set for 1 1/8 inch 28.6 mm steererStack-height spacers for a 1 1/8 inch fork steerer, 28.6 mm nominal, in 2.5, 5, 10 and 15 mm thicknesses so you can dial in bar height on a Canyon, Trek or S…Yeti Rambler MagSlider lid slider replacementThe magnetic slider on a Yeti Rambler 20 oz or 30 oz tumbler lid is the part that goes through the dishwasher, gets lost, and costs almost as much as a new lid.Bambu Lab X1C purge wiper replacement bladeA replacement for the small nozzle wiper blade at the rear of the Bambu Lab X1 Carbon and P1S, which wears a groove after a few hundred hours and stops clean…

Make your oven control knob for d-shaft now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.