Replacement parts

Extension cord reel crank handle

Cable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does. The replacement is a 90 mm arm 20 mm wide and 8 mm thick with a 6 mm pivot hole at one end and a 25 mm rotating knob on a 5 mm pin at the other, plus a detent bump that keeps it folded during storage. Print the arm flat with 100 percent infill and the knob on its face, in PETG so the pin does not shear.

SpeakCAD matches the pivot hole spacing and reel hub of your specific model rather than a lookalike, and can size the knob for gloved hands if you ask. Adjust the arm length in chat until it clears the reel body. The preview is free in the browser.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a cord reel crank: an arm 90 x 20 x 8 mm with a 6.2 mm pivot hole and detent bump at one end, a 5 mm pin boss at the other, and a separate 25 mm knob 12 mm tall with a 5.2 mm bore.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.Lawn mower height adjuster leverPush mowers set cutting height with a plastic lever that engages notched positions, and the pawl tooth wears until the wheel drops mid-mow.Ortlieb QL2.1 pannier hook insert replacementOrtlieb Back-Roller and Sport-Roller panniers use QL2.1 hooks with small plastic inserts that adapt the hook to rack tubing of 8, 10, 12 or 16 mm; the insert…Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.Kärcher K4 trigger gun holder clip replacementA replacement for the clip on the back of a Kärcher K4 or K5 pressure washer that holds the trigger gun during storage and often snaps off in cold weather.Dishwasher rack wheel replacementWhen a lower rack wheel cracks the whole basket drags and jams, yet the original spare often costs more than a set of four printed ones.

Make your extension cord reel crank handle now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.