1
Replacement parts
Creality K1 lid riser
This is not a fixed STL. SpeakCAD generates the creality k1 lid riser to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a lid riser for a Creality K1, perimeter frame with 15 mm rails, 25 mm tall, 4 mm lid lip, 30×12 mm PTFE slot, four dovetailed corners.
What a creality k1 lid riser is
A riser frame that sits on top of a Creality K1 (355 × 355 × 480 mm) and holds the glass lid 25 mm higher, letting heat out when printing PLA so the hotend and fan do not clog. It is a perimeter frame with 15 mm wide rails, a 4 mm lip that locates the lid, a 30 × 12 mm slot for a PTFE tube coming from a top spool, and printed in four corner pieces with dovetails. Print in PETG or ASA.
The K1 Max top is much larger, so this frame does not fit it. Open the ready-made riser in SpeakCAD for free, change its height in the viewer or the chat, then download the STL.
People also search
k1 lid riser stlcreality k1 top riserk1 lid riser placreality k1 lid spacer 3d print
Questions people ask about a creality k1 lid riser
A riser frame that sits on top of a Creality K1 (355 × 355 × 480 mm) and holds the glass lid 25 mm higher, letting heat out when printing PLA so the hotend and fan do not clog. It is a perimeter frame with 15 mm wide rails, a 4 mm lip that locates the lid, a 30 × 12 mm slot for a PTFE tube coming from a top spool, and printed in four corner pieces with dovetails. Print in PETG or ASA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a lid riser for a Creality K1, perimeter frame with 15 mm rails, 25 mm tall, 4 mm lid lip, 30×12 mm PTFE slot, four dovetailed corners.
The K1 Max top is much larger, so this frame does not fit it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Roller blind bottom bar end capEnd caps for the bottom weight bar of roller blinds, which stop the bar sliding out of its fabric pocket.Ironing board leg end capIroning board feet wear through and the bare steel tube scratches floors and slides on tile.Combination-square head replacement 300 mmA replacement head for a 300 mm combination square with a 1 mm rule slot, a 45 degree face, and an M5 lock.IKEA POÄNG cushion tie clipA clip that replaces a snapped POÄNG cushion tie so the seat pad stays on the frame.Elegoo Centauri Carbon lid riserA riser that holds the glass lid of an Elegoo Centauri Carbon (about 400 × 405 × 485 mm) 20 mm above the frame to vent the chamber when printing PLA.Whirlpool fridge door shelf end capAn end cap for Whirlpool and Hotpoint fridge door shelves, the side piece that holds the shelf onto the door liner ribs.