1
Brackets & mounts
Home Assistant Voice Preview Edition wall mount
This is not a fixed STL. SpeakCAD generates the home assistant voice preview edition wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Home Assistant Voice PE wall mount, 89×89 mm edge cradle open at the front, 12 mm USB-C slot, 3.5 mm jack notch, two 4 mm holes.
What a home assistant voice preview edition wall mount is
A wall mount for the Home Assistant Voice Preview Edition (about 88 × 88 × 20 mm) that holds it upright by its edges so the microphones and the rotary ring stay clear. The cradle is 89 × 89 mm with 0.5 mm clearance, open at the front, a 12 mm USB-C slot and a 3.5 mm jack notch at the bottom, and two 4 mm countersunk screw holes. Print in PLA, 2 mm walls.
An Echo Dot or Nest Mini mount will not fit the square body. Open the ready-made mount in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
home assistant voice pe mount stlvoice preview edition wall mount 3d printhome assistant voice holderha voice pe bracket 3d model
Questions people ask about a home assistant voice preview edition wall mount
A wall mount for the Home Assistant Voice Preview Edition (about 88 × 88 × 20 mm) that holds it upright by its edges so the microphones and the rotary ring stay clear. The cradle is 89 × 89 mm with 0.5 mm clearance, open at the front, a 12 mm USB-C slot and a 3.5 mm jack notch at the bottom, and two 4 mm countersunk screw holes. Print in PLA, 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Home Assistant Voice PE wall mount, 89×89 mm edge cradle open at the front, 12 mm USB-C slot, 3.5 mm jack notch, two 4 mm holes.
An Echo Dot or Nest Mini mount will not fit the square body. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
MikroTik hAP ac lite wall mountA wall cradle for a MikroTik hAP ac lite (113 × 89 × 28 mm) that holds it on edge with the ports facing down, so cables drop straight to the floor.Adjustable support bracket for a sagging graphics cardA telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…Sonos Era 100 wall bracket with cable channelA wall bracket for the Sonos Era 100, a 182 mm tall, 120 mm wide and 130 mm deep speaker weighing about 2 kg with a 1/4 inch-20 threaded insert on the rear.Gillette Fusion razor wall holder with adhesive padA wall holder that grips a Gillette Fusion, ProGlide or Harry's Truman handle by its neck so the cartridge hangs in the air and dries instead of rusting on t…Philips Hue Go 2 wall shelf with USB-CA 160 mm shelf that holds a Hue Go 2 and drops a USB-C cable through a 8 mm hole.IKEA HEMNES bookcase anti-tip bracketA bracket that ties a HEMNES bookcase (90 cm) to the wall through the existing top-rail holes.