1
Enclosures & cases
Heltec Mesh Node T114 case
This is not a fixed STL. SpeakCAD generates the heltec mesh node t114 case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Heltec T114 case, 53×32×16 mm cavity, 26×13 mm screen window, 40×30×5 mm LiPo pocket, USB-C slot, 6.5 mm SMA hole, 1.6 mm walls.
What a heltec mesh node t114 case is
A pocket case for a Heltec Mesh Node T114 (about 51 × 23 mm) with the optional 1.14 inch TFT and a 40 × 30 × 5 mm LiPo. The cavity is 53 × 32 × 16 mm with a 26 × 13 mm screen window, a 9.5 × 3.8 mm USB-C opening, a 6.5 mm SMA hole and two button caps. Walls are 1.6 mm. Print upside down in PETG.
The Heltec LoRa 32 V3 has an OLED and an ESP32 in a different outline, so its case will not fit. Open the ready-made model in SpeakCAD for free, change any millimetre, then download the STL.
People also search
heltec t114 case stlmesh node t114 enclosuret114 meshtastic case 3d printheltec t114 case 3d model
Questions people ask about a heltec mesh node t114 case
A pocket case for a Heltec Mesh Node T114 (about 51 × 23 mm) with the optional 1.14 inch TFT and a 40 × 30 × 5 mm LiPo. The cavity is 53 × 32 × 16 mm with a 26 × 13 mm screen window, a 9.5 × 3.8 mm USB-C opening, a 6.5 mm SMA hole and two button caps. Walls are 1.6 mm. Print upside down in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Heltec T114 case, 53×32×16 mm cavity, 26×13 mm screen window, 40×30×5 mm LiPo pocket, USB-C slot, 6.5 mm SMA hole, 1.6 mm walls.
The Heltec LoRa 32 V3 has an OLED and an ESP32 in a different outline, so its case will not fit. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
GPS NEO-6M module case with antenna windowA case for the GY-NEO6MV2 GPS module (about 36 × 25 mm) with its 25 × 25 mm ceramic patch antenna.Snap-lid enclosure for an Arduino UnoA protective box for an Arduino Uno with openings for the USB-B port and barrel jack, and a lid that clicks on without screws.AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.SONOFF ZBDongle-E protective case with USB extension slotA wraparound sleeve for the SONOFF ZBDongle-E Zigbee coordinator, which measures about 65 x 23 x 12 mm including its USB-A plug and carries an SMA antenna co…Nintendo Switch 2 dock dust coverA cover that sits on a Switch 2 dock (about 170 × 80 × 60 mm) when the console is undocked so dust is not in the USB-C slot.Orange Pi 5 caseA vented case for an Orange Pi 5 (100 × 62 mm).