1
Organizers & storage
Gridfinity 4 × 4 baseplate that fits the Bambu Lab A1 mini
This is not a fixed STL. SpeakCAD generates the gridfinity 4 × 4 baseplate that fits the bambu lab a1 mini to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a 4×4 Gridfinity baseplate, 168×168 mm, standard 42 mm grid, 6×2 mm magnet pockets, 0.8 mm bottom chamfer.
What a gridfinity 4 × 4 baseplate that fits the bambu lab a1 mini is
A 4 × 4 Gridfinity baseplate, 168 × 168 mm, that prints in one piece on the 180 × 180 mm bed of a Bambu Lab A1 mini. It uses the standard 42 mm grid with the 4.65 mm tall profile, has optional 6 × 2 mm magnet pockets and an 0.8 mm chamfer on the underside so it does not rock on a drawer bottom. Print flat in PLA.
A 5 × 5 plate is 210 mm and will not fit the A1 mini; tile several 4 × 4 plates instead. Open the plate in SpeakCAD for free, change the grid in the chat or the viewer, then download the STL.
People also search
gridfinity baseplate a1 minigridfinity baseplate 4x4 stla1 mini gridfinitygridfinity baseplate 3d print
Questions people ask about a gridfinity 4 × 4 baseplate that fits the bambu lab a1 mini
A 4 × 4 Gridfinity baseplate, 168 × 168 mm, that prints in one piece on the 180 × 180 mm bed of a Bambu Lab A1 mini. It uses the standard 42 mm grid with the 4.65 mm tall profile, has optional 6 × 2 mm magnet pockets and an 0.8 mm chamfer on the underside so it does not rock on a drawer bottom. Print flat in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a 4×4 Gridfinity baseplate, 168×168 mm, standard 42 mm grid, 6×2 mm magnet pockets, 0.8 mm bottom chamfer.
A 5 × 5 plate is 210 mm and will not fit the A1 mini; tile several 4 × 4 plates instead. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Prusa MK4S ObXidian nozzle-swap caddyA bench caddy that holds six MK4S / Nextruder nozzles (Cht, ObXidian, brass) in 10 mm hex pockets 12 mm deep plus a 8 mm well for the nozzle wrench.Dyson Supersonic r travel-pouch insertAn insert that keeps a Supersonic r and two nozzles from grinding in the official travel pouch.Bambu Lab A1 mini side spool roller standA low roller stand that sits next to an A1 mini so the spool feeds from the side rather than from the top of the Z column, handy for heavy 1 kg spools and ca…IKEA SKADIS metric hex key holder, 1.5 to 10 mmA SKADIS block for a full metric L-key set: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm.Forstner bit organizer, 15 to 35 mmA tray for a five-piece Forstner set (15, 20, 25, 30 and 35 mm) that holds each bit cutter-down in a round pocket 1 mm larger than the head, with a 10.5 mm s…Anker Nano charger and cable desk organizer trayA tray that keeps two Anker Nano GaN chargers and their USB-C cables together on a desk or in a travel drawer.