1
Enclosures & cases
GPS NEO-6M module case with antenna window
This is not a fixed STL. SpeakCAD generates the gps neo-6m module case with antenna window to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a NEO-6M GPS case, 37×26×14 mm cavity, 0.8 mm lid over a 25×25 mm patch, 4-pin header slot, 3 mm LED window, 1.6 mm walls.
What a gps neo-6m module case with antenna window is
A case for the GY-NEO6MV2 GPS module (about 36 × 25 mm) with its 25 × 25 mm ceramic patch antenna. The cavity is 37 × 26 × 14 mm, the lid is thinned to 0.8 mm over the patch so the signal is not blocked, and there is a 4-pin header slot plus a 3 mm LED window. Walls are 1.6 mm. Print the lid face-up in PLA or PETG, no metal-filled filament.
The NEO-M8N and BN-220 modules are different sizes. Open the ready-made model in SpeakCAD for free, change the cavity in the viewer or the chat, then download the STL.
People also search
neo-6m case stlgps neo 6m enclosure 3d printgy-neo6mv2 caseneo6m gps box 3d model
Questions people ask about a gps neo-6m module case with antenna window
A case for the GY-NEO6MV2 GPS module (about 36 × 25 mm) with its 25 × 25 mm ceramic patch antenna. The cavity is 37 × 26 × 14 mm, the lid is thinned to 0.8 mm over the patch so the signal is not blocked, and there is a 4-pin header slot plus a 3 mm LED window. Walls are 1.6 mm. Print the lid face-up in PLA or PETG, no metal-filled filament.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a NEO-6M GPS case, 37×26×14 mm cavity, 0.8 mm lid over a 25×25 mm patch, 4-pin header slot, 3 mm LED window, 1.6 mm walls.
The NEO-M8N and BN-220 modules are different sizes. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Raspberry Pi CM5 IO Board caseA case for the Raspberry Pi Compute Module 5 IO Board (160 × 90 mm) with a CM5 and cooler fitted.2S BMS and 18650 pack holderA holder for two 18650 cells in series (each 18 × 65 mm) with a 2S BMS board (about 46 × 20 mm) on the side.Wemos D1 mini and DHT22 wall caseA wall case for a Wemos D1 mini (34.2 × 25.6 mm) with a DHT22 sensor (25 × 15 × 7.7 mm body) mounted outside the main bay in a slotted pocket, away from the…Apple Watch Ultra charger puck travel case with cable wrapA pocket-size case for the Apple Watch magnetic fast charger used by the Ultra and Series 10, holding the puck (27.9 mm diameter, about 6 mm high) in a 28.4…LilyGO T-Display S3 case with screen bezelA desktop shell for the LilyGO T-Display S3, an ESP32-S3 board with a 1.9 inch 170 x 320 pixel display.Sonoff MINIR4M junction-box insertAn insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots.