1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Framework 13 HDMI-module tray
This is not a fixed STL. SpeakCAD generates the framework 13 hdmi-module tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a framework 13 hdmi-module tray is
A tray that stores four Framework 13 expansion cards (HDMI, USB-C, USB-A, Ethernet) in 32 × 16 mm wells so they are not in a bag. The plate is 140 × 70 × 14 mm. Print in PLA with 1.6 mm walls.
The Framework 16 module tray is a larger card. In SpeakCAD you add a fifth well, preview the tray in the browser without paying, then download the STL.
Example prompt
Model a Framework 13 HDMI-module tray 140×70×14 mm with four 32×16 mm wells, 1.6 mm walls.
People also search
framework 13 module tray stlframework 13 expansion card holder 3d printframework 13 hdmi trayframework card organizer 3d model
Questions people ask about a framework 13 hdmi-module tray
A tray that stores four Framework 13 expansion cards (HDMI, USB-C, USB-A, Ethernet) in 32 × 16 mm wells so they are not in a bag. The plate is 140 × 70 × 14 mm. Print in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Framework 13 HDMI-module tray 140×70×14 mm with four 32×16 mm wells, 1.6 mm walls.
The Framework 16 module tray is a larger card. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Bambu Lab H2D build-plate wall rackA wall rack that stores three H2D / 350 mm class build plates on 8 mm lips with 6 mm gaps so the textured side does not scratch.Sonicare DiamondClean travel-case insertAn insert that holds a DiamondClean handle and two heads in a 180 × 50 mm hard case with 0.4 mm clearance.IKEA BROR shelf end-stop pairA pair of end stops that keep bins from sliding off a BROR shelf (about 85 or 110 cm) when you roll the unit.Small parts sorting bins with label slotOpen-fronted bins for screws, nuts, LEDs, beads or any tiny hardware that otherwise ends up loose in a jar.Smartwatch charger cable organizer for Garmin Fitbit and WhoopA tray with three bays that keeps a Garmin four-pin clip, a Fitbit Charge 6 charging clip and a Whoop 4.0 battery pack each in its own pocket with the cable…IKEA Kallax insert divider for 33 cm cubesA cross-shaped divider that slots into a single Kallax cube and splits the 33 by 33 cm opening into four compartments for scarves, yarn, cables or toys.