1
Organizers & storage
Filament dry box 608 bearing spool roller
This is not a fixed STL. SpeakCAD generates the filament dry box 608 bearing spool roller to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a spool roller for a dry box, four 608 bearings on 8 mm axles, 110 mm apart, 150×90×30 mm base with a desiccant tray.
What a filament dry box 608 bearing spool roller is
A spool roller that sits inside a food container dry box so a 1 kg spool can unwind freely and feed a printer through a pass-through. It uses four 608 bearings (22 × 8 × 7 mm) on 8 mm printed axles, the rollers are 110 mm apart for 200 mm spools, and the base is 150 × 90 × 30 mm with a desiccant tray. Print in PETG, base flat.
A 3 kg spool is about 300 mm across, so it needs wider rollers and a bigger box. Open the roller in SpeakCAD for free, change the roller spacing in the viewer or the chat, then download the STL.
People also search
dry box spool roller stlfilament dry box roller 608dry box spool holderspool roller 3d print
Questions people ask about a filament dry box 608 bearing spool roller
A spool roller that sits inside a food container dry box so a 1 kg spool can unwind freely and feed a printer through a pass-through. It uses four 608 bearings (22 × 8 × 7 mm) on 8 mm printed axles, the rollers are 110 mm apart for 200 mm spools, and the base is 150 × 90 × 30 mm with a desiccant tray. Print in PETG, base flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a spool roller for a dry box, four 608 bearings on 8 mm axles, 110 mm apart, 150×90×30 mm base with a desiccant tray.
A 3 kg spool is about 300 mm across, so it needs wider rollers and a bigger box. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Voron Trident scraper holder for 2020 frameA scraper holder that bolts to the outside of a Voron Trident 2020 frame so the spatula is at hand without opening the doors.French cleat rack for Bessey F-clampsA French cleat rack for eight Bessey F-clamps.Jewelry tray with ring bars and earring holesA dresser tray combining a ring bar section, a grid of 1.5 mm holes for stud earrings, and a shallow well for bracelets and necklaces.Makita MakPac type 2 insert for impact bit casesA shallow tray for the Makita MakPac Type 2 case (about 395 by 295 mm inside, 105 mm deep) that holds two Makita impact bit cases, a set of 1/4 inch hex nut…Milwaukee Packout Compact Organizer bit railsTwo drop-in rails that turn a Packout Compact Organizer (48-22-8435) into a 1/4 inch hex-bit station with 20 pockets per rail, 6.6 mm hex by 12 mm deep.IKEA SKÅDIS 65 mm spray-can holderA SKÅDIS peg that holds a 65 mm spray can (paint, dry lube, contact cleaner) so it is not on the bench.