1
Brackets & mounts
Fiber ONT adjustable wall bracket
This is not a fixed STL. SpeakCAD generates the fiber ont adjustable wall bracket to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an ONT wall bracket, on-edge cradle for a 190×30 mm box, open bottom for ports, 30 mm radius fiber guide below, two 4 mm holes.
What a fiber ont adjustable wall bracket is
A wall bracket for a fiber ONT that holds the box on edge above the fiber outlet so the patch lead does not bend tighter than its 30 mm minimum radius. The cradle takes a box up to 190 mm wide and 30 mm thick, the bottom is open for the fiber and Ethernet ports, and a 30 mm radius guide sits under it. Print in PETG, 2 mm walls.
ONTs vary by provider, so measure yours and change the width. Open the model in SpeakCAD at no cost, adjust it in the viewer or the chat, then download the STL.
People also search
ont wall bracket stlfiber ont mount 3d printfibre modem wall holderont bracket 3d model
Questions people ask about a fiber ont adjustable wall bracket
A wall bracket for a fiber ONT that holds the box on edge above the fiber outlet so the patch lead does not bend tighter than its 30 mm minimum radius. The cradle takes a box up to 190 mm wide and 30 mm thick, the bottom is open for the fiber and Ethernet ports, and a 30 mm radius guide sits under it. Print in PETG, 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an ONT wall bracket, on-edge cradle for a 190×30 mm box, open bottom for ports, 30 mm radius fiber guide below, two 4 mm holes.
ONTs vary by provider, so measure yours and change the width. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Makita 18V LXT battery holder wall mount railA wall-mounted rail that holds Makita 18V LXT batteries (BL1830, BL1850, BL1860B) by their slide rails, exactly as a tool does, so the pack clicks in and the…AirPods Max 2 wall hook with braided cable slotA wall hook that holds AirPods Max 2 (about 188 × 168 × 83 mm) by the headband with a 20 mm padded saddle and a 8 × 40 mm slot underneath for the braided USB…Dyson V15 Detect combination-tool clipA clip that parks the V15 Detect combination tool on the wand next to the official crevice clip so both travel together.Raspberry Pi Touch Display 2 desk standA desk stand for the 7 inch Raspberry Pi Touch Display 2 (about 189 × 120 mm) with a Pi 5 mounted on the back.Curtain rod bracket for a 25 mm poleA replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke.Hidden AirTag mount under bike saddle railsA small clamshell that bolts between the two 7 mm rails under a bicycle saddle and hides an Apple AirTag (31.9 mm diameter, 8 mm thick) where a thief will no…