1
Enclosures & cases
ESP32-CAM case with lens hole and tripod thread
This is not a fixed STL. SpeakCAD generates the esp32-cam case with lens hole and tripod thread to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an ESP32-CAM case, 28×41.5×14 mm cavity, 8.5 mm lens hole, 3 mm flash window, 12×3 mm microSD slot, 1/4-20 tripod thread, 1.6 mm walls.
What a esp32-cam case with lens hole and tripod thread is
A case for an ESP32-CAM (27 × 40.5 mm board, about 12 mm tall with the OV2640 lens). The cavity is 28 × 41.5 × 14 mm with an 8.5 mm lens hole, a 3 mm flash-LED window, a 12 × 3 mm microSD slot at the end and a 1/4-20 tripod thread in the base. Walls are 1.6 mm. Print the shell face-down and the base flat in PETG.
The ESP32-CAM-MB programmer adds about 8 mm under the board, so a case sized for the bare board will not close on it. Open the ready-made model in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
esp32-cam case stlesp32 cam enclosure 3d printesp32-cam case tripod mountesp32 cam housing 3d model
Questions people ask about a esp32-cam case with lens hole and tripod thread
A case for an ESP32-CAM (27 × 40.5 mm board, about 12 mm tall with the OV2640 lens). The cavity is 28 × 41.5 × 14 mm with an 8.5 mm lens hole, a 3 mm flash-LED window, a 12 × 3 mm microSD slot at the end and a 1/4-20 tripod thread in the base. Walls are 1.6 mm. Print the shell face-down and the base flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an ESP32-CAM case, 28×41.5×14 mm cavity, 8.5 mm lens hole, 3 mm flash window, 12×3 mm microSD slot, 1/4-20 tripod thread, 1.6 mm walls.
The ESP32-CAM-MB programmer adds about 8 mm under the board, so a case sized for the bare board will not close on it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
2S BMS and 18650 pack holderA holder for two 18650 cells in series (each 18 × 65 mm) with a 2S BMS board (about 46 × 20 mm) on the side.ESPHome thermostat wall box with OLEDA wall box for a DIY ESPHome thermostat: an ESP32 DevKitC (54.4 × 27.9 mm), a 0.96 inch SSD1306 OLED (27 × 27 mm module) behind a 23 × 12 mm window and two 1…Battery pack case for three AA cells with switchA compact holder for three AA cells side by side, with a slot for a standard 19 x 13 mm slide switch and a wire exit, giving a 4.5 V supply for LED strips, s…Heltec LoRa V3 Meshtastic case with SMA antenna holeA rugged node case for the Heltec WiFi LoRa 32 V3, the board most Meshtastic beginners start with.Shelly 2PM Gen3 DIN-rail adapterAn adapter that snaps a Shelly 2PM Gen3 onto a 35 mm DIN rail with 0.3 mm clearance.Raspberry Pi 5 PoE+ HAT caseA case for a Raspberry Pi 5 (85 × 56 mm) powered by a PoE+ HAT on top.