1
Desk & office
Elgato Stream Deck + under monitor mount
This is not a fixed STL. SpeakCAD generates the elgato stream deck + under monitor mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Stream Deck + under-monitor mount, 142 mm cradle with 6 mm lips, 20 degree tilt, 14 mm USB-C gap, VESA 75/100 slots, 4 mm walls.
What a elgato stream deck + under monitor mount is
A mount that hangs an Elgato Stream Deck + (about 140 × 112 mm) under the bottom edge of a monitor or a monitor arm plate, clipped by a 142 mm cradle with 6 mm side lips and a 14 mm USB-C opening. It fixes to a VESA 75 or 100 plate or with two 4 mm screws, and tilts the unit 20 degrees. Print in PETG flat, 4 mm walls.
Monitors on their own stand have no free VESA plate, so use the desk version there. Open the mount in SpeakCAD without paying, edit it in the chat or the viewer, then download the STL.
People also search
stream deck plus monitor mount stlstream deck + under monitor 3d printstream deck plus vesa mountstream deck + mount
Questions people ask about a elgato stream deck + under monitor mount
A mount that hangs an Elgato Stream Deck + (about 140 × 112 mm) under the bottom edge of a monitor or a monitor arm plate, clipped by a 142 mm cradle with 6 mm side lips and a 14 mm USB-C opening. It fixes to a VESA 75 or 100 plate or with two 4 mm screws, and tilts the unit 20 degrees. Print in PETG flat, 4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Stream Deck + under-monitor mount, 142 mm cradle with 6 mm lips, 20 degree tilt, 14 mm USB-C gap, VESA 75/100 slots, 4 mm walls.
Monitors on their own stand have no free VESA plate, so use the desk version there. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Dyson Corrale HS07 charger dockA dock that holds a Dyson Corrale HS07 (about 45 × 32 mm closed) on its magnetic charger so the plates do not rest on the glass.Samsung Galaxy Buds 3 Pro desk wellA well that parks a Buds 3 Pro case (about 65 × 50 × 25 mm) at 15 degrees with a 12 mm USB-C slot.Monitor riser with under-shelf storageA platform that lifts a monitor 90 mm to eye height while the space beneath stores a keyboard, notebook or external drive.Anker 7-in-1 USB-C hub under-desk clip holderA holder that screws under the desk edge and grips an Anker 7-in-1 USB-C hub so its ports face forward within reach.Govee TV Backlight 3 camera hoodA hood that shades the Backlight 3 camera from a downlight so the colours stay true, 40 × 30 × 20 mm with a 12 mm lens well.Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.