1
Desk & office
Elgato Stream Deck + steep desk stand
This is not a fixed STL. SpeakCAD generates the elgato stream deck + steep desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Stream Deck + stand, 50 degree tilt, 142 mm wide cradle with 8 mm lip, 14 mm USB-C opening, 150×110 mm base, 3 mm walls.
What a elgato stream deck + steep desk stand is
A replacement stand for the Elgato Stream Deck + (about 140 × 112 mm) that tilts it to 50 degrees so the touch strip and dials face you instead of the ceiling. The cradle is 142 mm wide with an 8 mm lip, the back leaves a 14 mm opening for the USB-C cable, and the base is 150 × 110 mm with TPU feet pockets. Print on its side in PETG, 3 mm walls.
The Stream Deck MK.2 is smaller at 118 × 84 mm and falls through this cradle. Open the ready-made stand in SpeakCAD for free, change the angle in the viewer or the chat, then download the STL.
People also search
stream deck plus stand stlstream deck + stand 3d printstream deck plus angled standstream deck + holder
Questions people ask about a elgato stream deck + steep desk stand
A replacement stand for the Elgato Stream Deck + (about 140 × 112 mm) that tilts it to 50 degrees so the touch strip and dials face you instead of the ceiling. The cradle is 142 mm wide with an 8 mm lip, the back leaves a 14 mm opening for the USB-C cable, and the base is 150 × 110 mm with TPU feet pockets. Print on its side in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Stream Deck + stand, 50 degree tilt, 142 mm wide cradle with 8 mm lip, 14 mm USB-C opening, 150×110 mm base, 3 mm walls.
The Stream Deck MK.2 is smaller at 118 × 84 mm and falls through this cradle. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
MacBook Air 13-inch M4 vertical dockA vertical dock that holds a 13-inch MacBook Air M4 (about 11.3 mm closed, 304 mm wide) on its side so MagSafe and the two Thunderbolt ports stay clear.Studio Display VESA cable channelA channel that hides power and Thunderbolt behind a Studio Display on the official VESA mount so the cables follow the arm instead of hanging.Keychron Q2 HE wrist restA 20 mm wrist rest that matches a Keychron Q2 HE (about 360 × 150 mm) with two 8 × 2 mm magnet pockets for the case's front magnets.DJI Mic 2 transmitter desk standA desk stand for a DJI Mic 2 transmitter (30.5 × 38.5 × 19.5 mm) so it works as a tabletop mic in front of your laptop.Garmin Fenix and Forerunner charging cable dock standA desk dock that holds the Garmin four-pin charging plug pointing upward, so a Fenix 7 (47 mm case) or Forerunner 265 (46.1 mm case) drops onto the connector…Framework Laptop 13 vertical dockA vertical dock that holds a Framework Laptop 13 (about 16 mm thick closed, 297 mm wide) on its side so the expansion cards stay accessible.