1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Magic Trackpad 2 angled desk wedge
This is not a fixed STL. SpeakCAD generates the magic trackpad 2 angled desk wedge to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a magic trackpad 2 angled desk wedge is
A 8 degree wedge under a Magic Trackpad 2 / USB-C Trackpad (about 160 × 115 mm) so the front edge matches a Magic Keyboard. 10 mm rubber-foot recesses. Print in PLA.
A flat trackpad next to a tented keyboard is a wrist tax. In SpeakCAD you set 6 or 8 degrees, preview the wedge in the browser for free, then download the STL.
Example prompt
Create a Magic Trackpad wedge 160×115×12 mm, 8 degrees, four 10 mm foot recesses, 1.6 mm walls.
People also search
magic trackpad stand stlmagic trackpad 2 wedge 3d printapple trackpad angle standmagic trackpad riser 3d model
Questions people ask about a magic trackpad 2 angled desk wedge
A 8 degree wedge under a Magic Trackpad 2 / USB-C Trackpad (about 160 × 115 mm) so the front edge matches a Magic Keyboard. 10 mm rubber-foot recesses. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Magic Trackpad wedge 160×115×12 mm, 8 degrees, four 10 mm foot recesses, 1.6 mm walls.
A flat trackpad next to a tented keyboard is a wrist tax. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Magic Keyboard with Numeric Keypad angled trayA 6 degree tray for the Magic Keyboard with Numeric Keypad (about 418 × 115 × 11 mm) so the larger board matches a Magic Trackpad wedge.Sony WF-1000XM5 desk charging wellA well that parks an XM5 charging case (about 65 × 45 × 25 mm) on its USB-C side so the lid faces up.Desk tray for paper clips and binder clipsA shallow sorting tray that separates paper clips, binder clips of two sizes and push pins into distinct wells.iPhone 17 Air MagSafe wallet standA slim nightstand stand that an iPhone 17 Air (about 147 × 72 × 5.6 mm) snaps onto at 60 degrees for StandBy, with a 4 mm pocket behind the MagSafe disc for…Suunto Vertical charger-cable standA stand that holds a Suunto Vertical on its pogo cable at 25 degrees, 50 mm nest.Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.