1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Dyson OnTrac charging-case stand
This is not a fixed STL. SpeakCAD generates the dyson ontrac charging-case stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson ontrac charging-case stand is
A stand that parks a Dyson OnTrac charging case (about 80 × 70 × 40 mm) at 20 degrees so the earbuds face up on a nightstand. The well is 82 × 72 mm with 0.4 mm clearance and a 12 mm USB-C slot at the back. Print in PLA with 1.6 mm walls.
A generic earbud well hides the OnTrac lid button. Describe the case in SpeakCAD, preview the stand in the browser without paying, then download the STL.
Example prompt
Model an OnTrac charging-case stand 100×80×30 mm, 82×72 mm well at 20 degrees, 12 mm USB-C slot, 1.6 mm walls.
People also search
dyson ontrac stand stlontrac charging case holder 3d printdyson ontrac dockontrac earbud stand 3d model
Questions people ask about a dyson ontrac charging-case stand
A stand that parks a Dyson OnTrac charging case (about 80 × 70 × 40 mm) at 20 degrees so the earbuds face up on a nightstand. The well is 82 × 72 mm with 0.4 mm clearance and a 12 mm USB-C slot at the back. Print in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an OnTrac charging-case stand 100×80×30 mm, 82×72 mm well at 20 degrees, 12 mm USB-C slot, 1.6 mm walls.
A generic earbud well hides the OnTrac lid button. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Pen cup with sloped compartmentsA desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.Logitech MX Master 4 charging-puck standA stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up.HackRF One PortaPack H2M standA stand that holds a HackRF + PortaPack H2M at 30 degrees with a 14 mm USB slot.iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.IKEA LACK TV-unit cord combA comb that sits on the back rail of a LACK TV unit (145 cm) and separates HDMI, power and optical so they do not knot behind the stand.