1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Dyson HP07 remote bedside cradle
This is not a fixed STL. SpeakCAD generates the dyson hp07 remote bedside cradle to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson hp07 remote bedside cradle is
A bedside cradle for the HP07 remote so night-time oscillation changes do not mean a trip to the tower. The well is 112 × 42 mm with a 6 mm cable-free lip and a 70 × 50 mm base. Print in PLA with 1.6 mm walls.
The wall clip is for the hallway. In SpeakCAD you add a second remote, preview the cradle in the browser for free, then download the STL.
Example prompt
Create an HP07 bedside remote cradle 70×50×16 mm, 112×42 mm well, 1.6 mm walls.
People also search
dyson hp07 remote cradle stlhp07 bedside remote holder 3d printdyson hot cool remote standhp07 nightstand remote 3d model
Questions people ask about a dyson hp07 remote bedside cradle
A bedside cradle for the HP07 remote so night-time oscillation changes do not mean a trip to the tower. The well is 112 × 42 mm with a 6 mm cable-free lip and a 70 × 50 mm base. Print in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an HP07 bedside remote cradle 70×50×16 mm, 112×42 mm well, 1.6 mm walls.
The wall clip is for the hallway. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Small parts sorting bins with label slotOpen-fronted bins for screws, nuts, LEDs, beads or any tiny hardware that otherwise ends up loose in a jar.Smartwatch charger cable organizer for Garmin Fitbit and WhoopA tray with three bays that keeps a Garmin four-pin clip, a Fitbit Charge 6 charging clip and a Whoop 4.0 battery pack each in its own pocket with the cable…IKEA Kallax insert divider for 33 cm cubesA cross-shaped divider that slots into a single Kallax cube and splits the 33 by 33 cm opening into four compartments for scarves, yarn, cables or toys.Bambu Lab H2D build-plate wall rackA wall rack that stores three H2D / 350 mm class build plates on 8 mm lips with 6 mm gaps so the textured side does not scratch.Sonicare DiamondClean travel-case insertAn insert that holds a DiamondClean handle and two heads in a 180 × 50 mm hard case with 0.4 mm clearance.IKEA SMÅSTAD wardrobe rail hookA hook that hangs backpacks from a SMÅSTAD clothes rail (about 16 mm) so they are not on the floor of the wardrobe.