Organizers & storage

Apple TV, Roku and Fire TV remote holder

A sofa-side caddy with three angled slots sized to the remotes that come with streaming boxes. The Apple TV Siri Remote is 136 x 35 x 9.25 mm, the Roku Voice Remote about 145 x 40 x 20 mm and the Fire TV Alexa Voice Remote 142 x 38 x 16 mm, so each slot matches its remote with 1 mm clearance, leans back 15 degrees and is 60 mm deep so the remote stands without hiding its buttons. The base is 130 x 60 x 65 mm with 1.6 mm walls and a 4 mm keyhole on the back for a wall screw or a 3M strip recess for the side of a TV cabinet. Prints upright with no supports.

Remotes get lost because every generic caddy is either too loose or too tight for the slim Siri Remote. In SpeakCAD you describe the remotes you own, preview the holder free in the browser, add a Chromecast or Nvidia Shield remote slot in the chat, and download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a three-slot remote holder 130 x 60 x 65 mm with 1.6 mm walls, slots 60 mm deep leaning back 15 degrees sized 37 x 11 mm for an Apple TV Siri Remote, 42 x 22 mm for a Roku remote and 40 x 18 mm for a Fire TV remote, plus a 4 mm rear keyhole.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More organizers & storage

Hair tie and claw clip organizer standA bathroom counter stand with a vertical 25 mm post for stacking elastic hair ties, a slotted rail that grips claw clips by their hinges, and a small cup for…Smartwatch charger cable organizer for Garmin Fitbit and WhoopA tray with three bays that keeps a Garmin four-pin clip, a Fitbit Charge 6 charging clip and a Whoop 4.0 battery pack each in its own pocket with the cable…DeWalt ToughSystem drill bit index insert 1 to 13 mmA stepped drill bit index that drops into the small removable cup of a DeWalt ToughSystem 2.0 organizer (DWST08020) and holds a full metric set from 1 to 13…IKEA Kallax insert divider for 33 cm cubesA cross-shaped divider that slots into a single Kallax cube and splits the 33 by 33 cm opening into four compartments for scarves, yarn, cables or toys.Dr. Brown's bottle vent and insert organizer trayA tray that gives the many small parts of Dr.Small parts sorting bins with label slotOpen-fronted bins for screws, nuts, LEDs, beads or any tiny hardware that otherwise ends up loose in a jar.

Make your apple tv, roku and fire tv remote holder now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.