1
Enclosures & cases
DS3231 RTC module case
This is not a fixed STL. SpeakCAD generates the ds3231 rtc module case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a DS3231 RTC case, 39×23×12 mm cavity, 6-pin header slot, 22 mm CR2032 access opening, two M2.5 pegs, 1.2 mm walls.
What a ds3231 rtc module case is
A case for the DS3231 real-time clock module (about 38 × 22 mm) with its CR2032 holder on the back. The cavity is 39 × 23 × 12 mm with a 6-pin header slot, a 22 mm opening so the coin cell can be swapped without opening the case, and two M2.5 pegs. Walls are 1.2 mm. Print both halves flat in PLA.
The tiny DS3231 mini for the Raspberry Pi is about 14 × 13 mm and needs a different sleeve. Open the ready-made model in SpeakCAD for free, change any millimetre, then download the STL.
People also search
ds3231 case stlds3231 rtc enclosure 3d printrtc module caseds3231 box 3d model
Questions people ask about a ds3231 rtc module case
A case for the DS3231 real-time clock module (about 38 × 22 mm) with its CR2032 holder on the back. The cavity is 39 × 23 × 12 mm with a 6-pin header slot, a 22 mm opening so the coin cell can be swapped without opening the case, and two M2.5 pegs. Walls are 1.2 mm. Print both halves flat in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a DS3231 RTC case, 39×23×12 mm cavity, 6-pin header slot, 22 mm CR2032 access opening, two M2.5 pegs, 1.2 mm walls.
The tiny DS3231 mini for the Raspberry Pi is about 14 × 13 mm and needs a different sleeve. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Logitech MX Anywhere 4 travel caseA two-part case for an MX Anywhere 4, 110 × 70 × 40 mm with 0.4 mm clearance and a 8 mm dongle well.Arduino Nano Every caseA snap case for an Arduino Nano Every (18 × 45 mm).MAX7219 8×32 LED matrix clock caseA clock case for a 4-in-1 MAX7219 8×32 LED matrix (128 × 32 mm) driven by a Wemos D1 mini or ESP32.PMS5003 particulate sensor case with airflow pathA case for a Plantower PMS5003 (50 × 38 × 21 mm) that keeps its inlet and outlet on the same face apart, so the fan does not re-breathe its own exhaust.Junction box with gasket groove for outdoor useA small outdoor box for joining low-voltage cables, sensors or LED drivers where rain must stay out.Raspberry Pi Zero 2 W slim snap-fit caseA minimal shell for the Raspberry Pi Zero 2 W, which measures 65 x 30 mm with four M2.5 holes on a 58 x 23 mm pattern.