1
Desk & office
DJI Mic 2 transmitter desk stand
This is not a fixed STL. SpeakCAD generates the dji mic 2 transmitter desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a DJI Mic 2 transmitter desk stand, 3 mm clip tongue tilted 15° back, 50×45 mm base with washer pocket, USB-C channel.
What a dji mic 2 transmitter desk stand is
A desk stand for a DJI Mic 2 transmitter (30.5 × 38.5 × 19.5 mm) so it works as a tabletop mic in front of your laptop. The transmitter hooks its clip over a 3 mm tongue tilted 15° back, a 50 × 45 mm base with a washer pocket keeps it from tipping, and a channel leaves the USB-C port free. Print on its side in PETG.
The DJI Mic Mini transmitter is much smaller and has a different clip, so it will not sit right. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
dji mic 2 stand stldji mic 2 transmitter holder 3d printdji mic 2 desk mountdji mic 2 accessories
Questions people ask about a dji mic 2 transmitter desk stand
A desk stand for a DJI Mic 2 transmitter (30.5 × 38.5 × 19.5 mm) so it works as a tabletop mic in front of your laptop. The transmitter hooks its clip over a 3 mm tongue tilted 15° back, a 50 × 45 mm base with a washer pocket keeps it from tipping, and a channel leaves the USB-C port free. Print on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a DJI Mic 2 transmitter desk stand, 3 mm clip tongue tilted 15° back, 50×45 mm base with washer pocket, USB-C channel.
The DJI Mic Mini transmitter is much smaller and has a different clip, so it will not sit right. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Amazon Echo Show 5 adjustable tilt desk standA stand that raises the Amazon Echo Show 5 and tilts it so the screen is visible when standing at a kitchen counter or desk.Garmin Instinct 3 charger-clip dockA dock that holds an Instinct 3 on its clip charger at 20 degrees, 48 mm nest.iMac 24-inch M4 cable-tidy footA foot that clips onto the iMac 24 M4 stand and gathers power plus Thunderbolt into a 16 mm channel so they do not show from the front.Pro Display XDR stand cable tidyA tidy that clips onto the Pro Display XDR stand foot and gathers Thunderbolt and power into a 18 mm channel so they do not show from the front.Samsung Galaxy Watch Ultra charger dockA dock that holds a Galaxy Watch Ultra (about 47 mm) on its official puck at 15 degrees so the display is readable from the pillow.Under-desk headphone holder with screw mountA curved hanger that screws to the underside of a desk so headphones hang within reach.