1
Brackets & mounts
Creality Ender-3 V3 SE webcam mount
This is not a fixed STL. SpeakCAD generates the creality ender-3 v3 se webcam mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a webcam arm for a 2040 extrusion, two M5 holes 20 mm apart, 120 mm arm with two M3 hinges, 1/4-20 screw head.
What a creality ender-3 v3 se webcam mount is
An articulated webcam arm that bolts to the top 2040 beam of an Ender-3 V3 SE, for OctoPrint or Klipper timelapses. The base has two M5 holes 20 mm apart for T-nuts, the arm is 120 mm long with two M3 hinges, and the head takes a 1/4-20 screw for a Logitech C920 or a Raspberry Pi camera case. Print in PETG, flat.
On a bed-slinger the camera should look along the X axis, not the Y axis, or the bed will run out of frame. Open the model in SpeakCAD for free, adjust the arm in the viewer or the chat, then download the STL.
People also search
ender 3 v3 se camera mount stlender 3 webcam mount2040 webcam armoctoprint camera mount 3d print
Questions people ask about a creality ender-3 v3 se webcam mount
An articulated webcam arm that bolts to the top 2040 beam of an Ender-3 V3 SE, for OctoPrint or Klipper timelapses. The base has two M5 holes 20 mm apart for T-nuts, the arm is 120 mm long with two M3 hinges, and the head takes a 1/4-20 screw for a Logitech C920 or a Raspberry Pi camera case. Print in PETG, flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a webcam arm for a 2040 extrusion, two M5 holes 20 mm apart, 120 mm arm with two M3 hinges, 1/4-20 screw head.
On a bed-slinger the camera should look along the X axis, not the Y axis, or the bed will run out of frame. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Owlet Cam 2 crib-rail clampA clamp that holds an Owlet Cam 2 on a 20–40 mm crib rail with a 15 degree downward tilt.Peloton Row phone cradleA cradle that clips onto a Peloton Row rail (about 35 mm) and holds a phone at 20 degrees so you can follow a class without the official tablet.Tesla Model Y Juniper screen-edge phone holderA spring-free phone holder that clamps to the right edge of the 15.4 inch screen in a 2025 Model Y Juniper and carries a cradle for phones 70 to 80 mm wide.Xbox Series X wall mount bracketA wall bracket for an Xbox Series X (151 × 151 × 301 mm) that holds it upright in a 153 × 153 mm open cage, 40 mm tall at the bottom with a 25 mm top strap,…Samsung Galaxy Tab S9 wall mount bracket with charging slotA wall bracket that turns a Samsung Galaxy Tab S9 (254.3 x 165.8 x 5.9 mm) into a smart home panel or family calendar.Makita 18V LXT battery holder wall mount railA wall-mounted rail that holds Makita 18V LXT batteries (BL1830, BL1850, BL1860B) by their slide rails, exactly as a tool does, so the pack clicks in and the…