1
Enclosures & cases
Arduino Nano ESP32 case
This is not a fixed STL. SpeakCAD generates the arduino nano esp32 case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an Arduino Nano ESP32 case, 18.8×45.8×14 mm cavity, 9.5×3.8 mm USB-C slot, 2 mm reset hole, two 2.6×38 mm pin slots, 1.6 mm walls.
What a arduino nano esp32 case is
A case for an Arduino Nano ESP32 (18 × 45 mm) with headers down. The cavity is 18.8 × 45.8 × 14 mm with a 9.5 × 3.8 mm USB-C opening, a 2 mm hole over the reset button and a 3 mm window for the RGB LED. Two 2.6 × 38 mm slots in the base let the pins pass through into a breadboard or socket. Walls are 1.6 mm. Print upside down in PETG.
A classic Nano has a mini-USB port at a different height, so its case leaves a gap. Open the ready-made model in SpeakCAD for free, adjust any millimetre, then download the STL.
People also search
arduino nano esp32 case stlnano esp32 enclosure 3d printarduino nano esp32 boxnano esp32 case 3d model
Questions people ask about a arduino nano esp32 case
A case for an Arduino Nano ESP32 (18 × 45 mm) with headers down. The cavity is 18.8 × 45.8 × 14 mm with a 9.5 × 3.8 mm USB-C opening, a 2 mm hole over the reset button and a 3 mm window for the RGB LED. Two 2.6 × 38 mm slots in the base let the pins pass through into a breadboard or socket. Walls are 1.6 mm. Print upside down in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an Arduino Nano ESP32 case, 18.8×45.8×14 mm cavity, 9.5×3.8 mm USB-C slot, 2 mm reset hole, two 2.6×38 mm pin slots, 1.6 mm walls.
A classic Nano has a mini-USB port at a different height, so its case leaves a gap. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
LilyGO T-Display S3 case with screen bezelA desktop shell for the LilyGO T-Display S3, an ESP32-S3 board with a 1.9 inch 170 x 320 pixel display.Sonoff MINIR4M junction-box insertAn insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots.Raspberry Pi 3B+ caseA two-part case for a Raspberry Pi 3 Model B+ (85 × 56 mm).XL4015 buck converter caseA vented case for the XL4015 5 A buck converter (about 54 × 23 × 18 mm with its heatsink).VEML7700 light sensor window caseA window-mounted case for a VEML7700 lux breakout (about 25 × 18 mm) that faces the sensor at the glass through a 6 mm aperture, for daylight automations in…Project box with sliding lid, 100 x 60 x 30 mmA general purpose electronics box with a lid that slides in along dovetail grooves, avoiding screws and giving quick access to whatever is inside.