1
Replacement parts
Anycubic Kobra S1 riser feet
This is not a fixed STL. SpeakCAD generates the anycubic kobra s1 riser feet to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design riser feet for an Anycubic Kobra S1, 45×45 mm, 25 mm lift, 25 mm pocket 5 mm deep, internal ribs, 3 mm walls.
What a anycubic kobra s1 riser feet is
Riser feet that lift a Kobra S1 25 mm so its bottom vents breathe and the ACE Pro cable can run under it. Each foot is 45 mm square with a 25 mm pocket 5 mm deep for the stock foot, 3 mm walls and internal ribs. Print in PETG, or TPU 95A for damping, pocket up.
A Bambu P1S foot pocket is placed differently, so its feet do not fit the S1 base. Open the ready-made feet in SpeakCAD for free, set the height in the viewer or the chat, then download the STL.
People also search
kobra s1 feet stlanycubic kobra s1 riserkobra s1 anti vibration feetkobra s1 feet 3d print
Questions people ask about a anycubic kobra s1 riser feet
Riser feet that lift a Kobra S1 25 mm so its bottom vents breathe and the ACE Pro cable can run under it. Each foot is 45 mm square with a 25 mm pocket 5 mm deep for the stock foot, 3 mm walls and internal ribs. Print in PETG, or TPU 95A for damping, pocket up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design riser feet for an Anycubic Kobra S1, 45×45 mm, 25 mm lift, 25 mm pocket 5 mm deep, internal ribs, 3 mm walls.
A Bambu P1S foot pocket is placed differently, so its feet do not fit the S1 base. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA SMÅSTAD drawer-stop clipA clip that keeps a SMÅSTAD kids drawer from being pulled all the way out, 22 × 14 × 10 mm with a 3 mm lip that grabs the official runner.Creality K1 lid riserA riser frame that sits on top of a Creality K1 (355 × 355 × 480 mm) and holds the glass lid 25 mm higher, letting heat out when printing PLA so the hotend a…Samsung fridge door bin side clipA side clip for Samsung fridge door bins, the small tab that holds the clear bin onto the ribs of the door liner and snaps when the bin is overloaded.Kenwood Chef slow outlet coverA replacement cover for the front slow-speed outlet of Kenwood Chef mixers, the twist-on cap that keeps flour out of the drive.Extension cord reel crank handleCable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does.Digital-caliper SR44 battery-door replacementA snap-in battery door for a 150 mm digital caliper that takes an SR44 / 357 cell, 16 mm across with a 0.6 mm lip.