1
Brackets & mounts
28BYJ-48 stepper motor mount
This is not a fixed STL. SpeakCAD generates the 28byj-48 stepper motor mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 28BYJ-48 mount, 45×35×4 mm upright, 28.4 mm body hole, two 4.2 mm holes 35 mm apart, 10 mm shaft slot, ULN2003 pocket.
What a 28byj-48 stepper motor mount is
A mount for a 28BYJ-48 stepper (28 mm body, flange holes 35 mm apart, 5 mm D-flat shaft offset 8 mm from the centre). The upright is 45 × 35 × 4 mm with a 28.4 mm body hole, two 4.2 mm flange holes and a 10 mm shaft slot, and the base carries a 35 × 32 mm ULN2003 board pocket. Print on its side in PETG.
NEMA 17 motors are 42 mm square with a different hole pattern. Open the ready-made model in SpeakCAD for free, adjust any millimetre, then download the STL.
People also search
28byj-48 mount stl28byj-48 bracket 3d print28byj48 stepper holder28byj-48 mount 3d model
Questions people ask about a 28byj-48 stepper motor mount
A mount for a 28BYJ-48 stepper (28 mm body, flange holes 35 mm apart, 5 mm D-flat shaft offset 8 mm from the centre). The upright is 45 × 35 × 4 mm with a 28.4 mm body hole, two 4.2 mm flange holes and a 10 mm shaft slot, and the base carries a 35 × 32 mm ULN2003 board pocket. Print on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 28BYJ-48 mount, 45×35×4 mm upright, 28.4 mm body hole, two 4.2 mm holes 35 mm apart, 10 mm shaft slot, ULN2003 pocket.
NEMA 17 motors are 42 mm square with a different hole pattern. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Kettlebell wall rack hook for garage gymA hook that hangs a light kettlebell (up to about 12 kg) by its handle against a garage wall, freeing floor space beside the squat rack.Bambu Lab A1 AMS Lite spool holder riser bracketA riser that lifts the Bambu Lab AMS Lite 60 mm above the desk so the four spools clear the A1 or A1 mini bed when the printer sits on a shelf, and adds feet…25 mm French-cleat cordless-drill holderA French-cleat cradle for an 18V drill with a 50 mm handle saddle and a 20 mm battery rest, cut for a 25 mm cleat.IKEA LACK shelf wall-bracket coverA cover that hides the stamped LACK shelf bracket (about 50 × 40 mm) so the 30 or 110 cm shelf looks like it floats.M5Stack Atom Lite Bluetooth proxy wall mountA plug-side wall mount for an M5Stack Atom Lite (24 × 24 × 10 mm) running as an ESPHome Bluetooth proxy, so it sits mid-room on a USB charger instead of behi…Wall holder for a laptop power brickA cradle that holds a power supply brick against the wall or under a shelf, keeping it off the carpet where it collects dust and overheats.