1
Brackets & mounts
Xbox Series X wall mount bracket
This is not a fixed STL. SpeakCAD generates the xbox series x wall mount bracket to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an Xbox Series X wall bracket, 153×153 mm open cage 40 mm tall, 25 mm top strap, 160×120×5 mm plate, four 5 mm countersunk holes.
What a xbox series x wall mount bracket is
A wall bracket for an Xbox Series X (151 × 151 × 301 mm) that holds it upright in a 153 × 153 mm open cage, 40 mm tall at the bottom with a 25 mm top strap, so the top vent and back ports stay clear. The back plate is 160 × 120 × 5 mm with four 5 mm countersunk holes for wall plugs. Print in PETG, 5 mm walls, 50 % infill.
The Series S is only 63.5 mm thick and needs a flat bracket instead. Open the ready-made bracket in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
xbox series x wall mount stlxbox series x bracket 3d printxbox series x wall mount 3d modelmount xbox series x on wall
Questions people ask about a xbox series x wall mount bracket
A wall bracket for an Xbox Series X (151 × 151 × 301 mm) that holds it upright in a 153 × 153 mm open cage, 40 mm tall at the bottom with a 25 mm top strap, so the top vent and back ports stay clear. The back plate is 160 × 120 × 5 mm with four 5 mm countersunk holes for wall plugs. Print in PETG, 5 mm walls, 50 % infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an Xbox Series X wall bracket, 153×153 mm open cage 40 mm tall, 25 mm top strap, 160×120×5 mm plate, four 5 mm countersunk holes.
The Series S is only 63.5 mm thick and needs a flat bracket instead. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Saddle clamp for 20 mm electrical conduitA single-screw saddle that fixes 20 mm PVC electrical conduit to a wall or joist, handy when a run needs one more clip and the shop is closed.Philips Hue Play light bar monitor clip mountA clip that hangs a Philips Hue Play light bar on the back of a monitor without the stock adhesive feet.reMarkable Paper Pro wall dock with Marker slotA wall dock that holds a reMarkable Paper Pro (about 274 × 197 × 5.1 mm) and parks the Marker Plus in a 12 mm bore 140 mm deep.IKEA LACK wall-shelf hidden bracketA hidden bracket that replaces the stamped LACK shelf hardware with a 120 × 20 × 16 mm French-cleat style plate so a 110 cm LACK shelf sits tighter to the wall.Fiber ONT adjustable wall bracketA wall bracket for a fiber ONT that holds the box on edge above the fiber outlet so the patch lead does not bend tighter than its 30 mm minimum radius.Garmin Edge 130 Plus stem top cap mountA stem top cap with a built-in Garmin quarter-turn tab that holds a small Edge 130 Plus right above the steerer.