1
Brackets & mounts
Xbox Series X under desk mount
This is not a fixed STL. SpeakCAD generates the xbox series x under desk mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an under-desk Xbox Series X mount, two L cradles 60 mm wide for a 301×151×151 mm console, 1 mm clearance, two 5 mm screw holes each.
What a xbox series x under desk mount is
An under-desk mount for an Xbox Series X lying on its side (301 × 151 × 151 mm). Two L-shaped cradles 60 mm wide hold it by the ends with 1 mm clearance, each with two 5 mm screw holes into the desk, and the middle is fully open so the vent is never blocked. Print both parts on their sides in PETG, 5 mm walls, 50 % infill.
The Series S at 275 × 151 × 63.5 mm drops straight through these cradles. Open the mount in SpeakCAD at no cost, edit it in the chat or the viewer, then download the STL.
People also search
xbox series x under desk mount stlxbox series x desk mount 3d printxbox series x under tablexbox series x mount
Questions people ask about a xbox series x under desk mount
An under-desk mount for an Xbox Series X lying on its side (301 × 151 × 151 mm). Two L-shaped cradles 60 mm wide hold it by the ends with 1 mm clearance, each with two 5 mm screw holes into the desk, and the middle is fully open so the vent is never blocked. Print both parts on their sides in PETG, 5 mm walls, 50 % infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an under-desk Xbox Series X mount, two L cradles 60 mm wide for a 301×151×151 mm console, 1 mm clearance, two 5 mm screw holes each.
The Series S at 275 × 151 × 63.5 mm drops straight through these cradles. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
HomePod mini 2 outlet shelfA shelf that hangs a HomePod mini 2 from a US or EU outlet so it does not sit on the kitchen wet zone, 100 mm well and a 20 mm cable drop.SG90 servo bracketAn L bracket for an SG90 or MG90S micro servo (22.5 × 12.2 × 22.7 mm body, 32 mm across the tabs).Hyundai Ioniq 5 cup holder MagSafe mountA phone mount that plugs into one of the Ioniq 5 Universal Island cup holders and raises a MagSafe puck (about 56 mm across) to screen height.Sony A6700 Arca-Swiss plateA short Arca-Swiss plate for the Sony A6700 (122 × 69 × 75.1 mm).reMarkable 2 wall mount holder with Marker slotA wall holder for the reMarkable 2 tablet (187 x 246 x 4.7 mm) that keeps it and its Marker within reach beside a desk or on a kitchen wall for the shopping…Type 2 EV charging plug holster with cable hookA garage holster that receives the Type 2 (Mennekes) plug of a home wallbox or granny cable so the pins stay dry and the cable hangs in a loop below.