1
Brackets & mounts
Wahoo ELEMNT BOLT v2 stem cap mount
This is not a fixed STL. SpeakCAD generates the wahoo elemnt bolt v2 stem cap mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Wahoo BOLT stem cap mount, 32 mm cap for 28.6 mm steerer, 6.5 mm counterbored M6 hole, Wahoo wedge 12 mm above the cap.
What a wahoo elemnt bolt v2 stem cap mount is
A stem top cap that holds a Wahoo ELEMNT BOLT v2 on the Wahoo wedge interface, for riders who want a clean cockpit without an out-front arm. It fits a 1 1/8 inch (28.6 mm) steerer, uses a 6.5 mm counterbored hole for the M6 top cap bolt, and sets the wedge 12 mm above the cap. Print upright in PETG or ASA with 100 percent infill.
The BOLT is small enough for a cap mount, but the ROAM is better on an out-front arm. Open the ready-made cap in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
wahoo bolt stem mountwahoo elemnt bolt top cap mount stlwahoo stem cap mount 3d printbolt v2 stem mount
Questions people ask about a wahoo elemnt bolt v2 stem cap mount
A stem top cap that holds a Wahoo ELEMNT BOLT v2 on the Wahoo wedge interface, for riders who want a clean cockpit without an out-front arm. It fits a 1 1/8 inch (28.6 mm) steerer, uses a 6.5 mm counterbored hole for the M6 top cap bolt, and sets the wedge 12 mm above the cap. Print upright in PETG or ASA with 100 percent infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Wahoo BOLT stem cap mount, 32 mm cap for 28.6 mm steerer, 6.5 mm counterbored M6 hole, Wahoo wedge 12 mm above the cap.
The BOLT is small enough for a cap mount, but the ROAM is better on an out-front arm. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Xbox Series X wall mount bracketA wall bracket for an Xbox Series X (151 × 151 × 301 mm) that holds it upright in a 153 × 153 mm open cage, 40 mm tall at the bottom with a 25 mm top strap,…Samsung Galaxy Tab S9 wall mount bracket with charging slotA wall bracket that turns a Samsung Galaxy Tab S9 (254.3 x 165.8 x 5.9 mm) into a smart home panel or family calendar.Makita 18V LXT battery holder wall mount railA wall-mounted rail that holds Makita 18V LXT batteries (BL1830, BL1850, BL1860B) by their slide rails, exactly as a tool does, so the pack clicks in and the…Dyson V15 Detect wand wall holsterA wall holster that parks a V15 Detect wand and two tools next to the official dock, which only holds one.Festool CT MIDI hose wall hookA hook that parks a CT MIDI 27 mm hose in a 80 mm loop so it is not a trip on the floor.Voron 2.4 Raspberry Pi Camera Module 3 mountA camera mount for a Raspberry Pi Camera Module 3 (25 × 24 mm board) that bolts to the 2020 frame of a Voron 2.4 for Klipper and Mainsail timelapses.