1
Organizers & storage
Tesla Model Y Juniper cup holder coin insert
This is not a fixed STL. SpeakCAD generates the tesla model y juniper cup holder coin insert to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Model Y Juniper cup holder insert, 76 mm diameter, 60 mm deep, 26 mm coin tube, 40×30 mm bay, 20 mm finger notch, 2 mm walls, PETG.
What a tesla model y juniper cup holder coin insert is
A drop-in insert for one front cup holder of a 2025 Model Y Juniper that turns it into a coin, key and sunglasses-clip tray. The body is about 76 mm across and 60 mm deep with 1 mm of clearance, it holds a 26 mm coin tube and a 40 × 30 mm open bay, and a 20 mm finger notch lifts it out. Walls are 2 mm. Print upright in PETG or ASA.
The front cup holders in older Model Y cars are a slightly different shape, so measure yours and tell the chat. Open the ready-made insert in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
tesla model y juniper cup holder insertmodel y coin holder stltesla cup holder organizer 3d printmodel y juniper console organizer
Questions people ask about a tesla model y juniper cup holder coin insert
A drop-in insert for one front cup holder of a 2025 Model Y Juniper that turns it into a coin, key and sunglasses-clip tray. The body is about 76 mm across and 60 mm deep with 1 mm of clearance, it holds a 26 mm coin tube and a 40 × 30 mm open bay, and a 20 mm finger notch lifts it out. Walls are 2 mm. Print upright in PETG or ASA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Model Y Juniper cup holder insert, 76 mm diameter, 60 mm deep, 26 mm coin tube, 40×30 mm bay, 20 mm finger notch, 2 mm walls, PETG.
The front cup holders in older Model Y cars are a slightly different shape, so measure yours and tell the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
25 mm French-cleat safety-glasses binA 120 × 80 × 60 mm bin on a 25 mm French cleat that holds two pairs of safety glasses and a pack of earplugs.IKEA TROFAST label-holder clipA clip that hangs a 70 × 25 mm label on the front of a TROFAST bin so kids can find Lego without opening every drawer.Tesla Model 3 Highland key card console holderA slim holder for a spare Tesla key card (credit-card size, 85.6 × 54 × 0.8 mm) that sticks inside the Model 3 Highland centre console so the card is always…French cleat shelf for a Stanley No. 4 hand planeA plane shelf for a Stanley or Record No.Entryway catch-all tray for keys and walletA low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.Tesla Model 3 center console organizer tray insertA tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a su…