1
Organizers & storage
Tesla Model 3 Highland key card console holder
This is not a fixed STL. SpeakCAD generates the tesla model 3 highland key card console holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Tesla key card holder, 86.6×55×1.4 mm slot, 25 mm thumb cut-out, 90×58 mm flat back for VHB tape, 1.6 mm walls, PETG.
What a tesla model 3 highland key card console holder is
A slim holder for a spare Tesla key card (credit-card size, 85.6 × 54 × 0.8 mm) that sticks inside the Model 3 Highland centre console so the card is always in the car but out of sight. The slot is 86.6 × 55 × 1.4 mm with a 25 mm thumb cut-out, the back is a flat 90 × 58 mm pad for VHB tape and the walls are 1.6 mm. Print flat in PETG.
The card has to reach the B-pillar reader to unlock, so this is a storage spot, not a place where the car reads it. Open the ready-made holder in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
tesla key card holdermodel 3 highland key card holder stltesla key card storage 3d printtesla card holder console
Questions people ask about a tesla model 3 highland key card console holder
A slim holder for a spare Tesla key card (credit-card size, 85.6 × 54 × 0.8 mm) that sticks inside the Model 3 Highland centre console so the card is always in the car but out of sight. The slot is 86.6 × 55 × 1.4 mm with a 25 mm thumb cut-out, the back is a flat 90 × 58 mm pad for VHB tape and the walls are 1.6 mm. Print flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Tesla key card holder, 86.6×55×1.4 mm slot, 25 mm thumb cut-out, 90×58 mm flat back for VHB tape, 1.6 mm walls, PETG.
The card has to reach the B-pillar reader to unlock, so this is a storage spot, not a place where the car reads it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Prusa MK4 nozzle storage box for Nextruder and V6 nozzlesA hinged box that keeps Prusa Nextruder nozzles, the V6 adapter nozzles and a couple of Obxidian and high-flow nozzles sorted by size instead of loose in a bag.DeWalt TSTAK VI oscillating-tool insertAn insert for a TSTAK VI deep box that holds a DCS356, eight blades in 2 mm slots, and the charger.IKEA IVAR side hook-rail clipA clip that hangs a hook rail from an IVAR side upright (about 42 mm) so bags live on the side, not the aisle.Sovol SV06 nozzle storage blockA storage block for the M6 brass and hardened nozzles of a Sovol SV06, with twelve M6 threaded holes 8 mm deep, each labelled 0.2, 0.4, 0.6 or 0.8, and a 7 m…French cleat rack for box spirit levelsA French cleat rack for four box-section spirit levels from 600 to 1200 mm, up to about 32 mm thick and 70 mm tall.Charging cable organizer with wrap postsA flat plate with staggered posts that lets you coil USB-C, Lightning and micro-USB cables in figure eights and park the connectors in labelled pockets so th…