1
Brackets & mounts
Steam Deck OLED wall mount cradle
This is not a fixed STL. SpeakCAD generates the steam deck oled wall mount cradle to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Steam Deck OLED wall cradle, 240×40 mm plate, two grip cups 50 mm wide 52 mm deep, open top for USB-C, three 4 mm holes, 3 mm walls.
What a steam deck oled wall mount cradle is
A wall cradle for a Steam Deck OLED (298 × 117 × 49 mm) that holds it by the grips, screen out, with the top USB-C port left open so it can charge on the wall. Two 50 mm wide cups are 52 mm deep with 1 mm clearance, spaced to clear the trackpads, on a 240 × 40 mm plate with three 4 mm holes. Print in PETG, 3 mm walls.
The LCD Steam Deck has the same body, but a ROG Ally X is shorter and slips out. Open the ready-made cradle in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
steam deck oled wall mount stlsteam deck wall holder 3d printsteam deck wall cradlesteam deck wall mount 3d model
Questions people ask about a steam deck oled wall mount cradle
A wall cradle for a Steam Deck OLED (298 × 117 × 49 mm) that holds it by the grips, screen out, with the top USB-C port left open so it can charge on the wall. Two 50 mm wide cups are 52 mm deep with 1 mm clearance, spaced to clear the trackpads, on a 240 × 40 mm plate with three 4 mm holes. Print in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Steam Deck OLED wall cradle, 240×40 mm plate, two grip cups 50 mm wide 52 mm deep, open top for USB-C, three 4 mm holes, 3 mm walls.
The LCD Steam Deck has the same body, but a ROG Ally X is shorter and slips out. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
DJI Osmo Pocket 3 bike handlebar mountA handlebar mount for the DJI Osmo Pocket 3 (139.7 × 42.2 × 33.5 mm).Garmin Edge 840 out-front mount for 31.8 mm barsAn out-front mount that clamps a 31.8 mm road handlebar and holds a Garmin Edge 840 (or the identically sized Edge 540) level with the stem, roughly 75 mm ah…Elegoo Neptune 4 build plate wall hanger rackA wall rack that stores three spare Elegoo Neptune 4 or Neptune 4 Pro flexible PEI plates (235 by 235 mm) on edge so the coating never touches another plate.Mac mini M4 Pro VESA 100 bracketA VESA 100 bracket that hangs a Mac mini M4 Pro behind a monitor, 130 × 130 mm plate with 20 mm standoffs and four M4 holes.DC barrel jack panel mount plateA small plate that adds a 5.5 × 2.1 mm DC jack to a case wall.Wallbox Pulsar Plus cable organiser hooksA pair of wrap-around hooks that screw to the wall above and below a Wallbox Pulsar Plus (166 × 163 × 82 mm) so a 7 m tethered cable can be wound in a larger…