1
Brackets & mounts
Steam Deck OLED car headrest mount
This is not a fixed STL. SpeakCAD generates the steam deck oled car headrest mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Steam Deck OLED headrest mount, clips for two 13 mm posts 150 mm apart, two grip cups 50 mm wide for a 298×117×49 mm device, 4 mm walls.
What a steam deck oled car headrest mount is
A back-seat headrest mount for a Steam Deck OLED (298 × 117 × 49 mm) that clamps both headrest posts (usually 12 to 14 mm, 140 to 160 mm apart) and holds the Deck in two grip cups for movies on long drives. The cups are 50 mm wide with 1 mm clearance, the arm is 20 mm thick, and the post clips have a 13 mm bore with a TPU insert. Print in PETG, 4 mm walls.
Some cars use 10 mm or 16 mm posts, so check yours first. Open the mount in SpeakCAD at no cost, set your post spacing in the chat or the viewer, then download the STL.
People also search
steam deck car mount stlsteam deck headrest holder 3d printsteam deck car headrest mountsteam deck oled car holder
Questions people ask about a steam deck oled car headrest mount
A back-seat headrest mount for a Steam Deck OLED (298 × 117 × 49 mm) that clamps both headrest posts (usually 12 to 14 mm, 140 to 160 mm apart) and holds the Deck in two grip cups for movies on long drives. The cups are 50 mm wide with 1 mm clearance, the arm is 20 mm thick, and the post clips have a 13 mm bore with a TPU insert. Print in PETG, 4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Steam Deck OLED headrest mount, clips for two 13 mm posts 150 mm apart, two grip cups 50 mm wide for a 298×117×49 mm device, 4 mm walls.
Some cars use 10 mm or 16 mm posts, so check yours first. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Ceiling mount ring for a round access pointA ring-shaped mounting plate for disc-style wireless access points that ship without a suitable ceiling bracket, or whose original plate was lost.Philips Hue dimmer switch magnetic wall plateA replacement wall plate for the Philips Hue dimmer switch, a remote about 115 x 35 mm that normally clicks onto a stock plate.Pixel 10 Pro XL out-front bike mountAn out-front handlebar mount for a Pixel 10 Pro XL (about 163 × 77 × 8.6 mm) with a 22.2 / 31.8 mm clamp and a 70 mm deep cradle that clears the Camera Bar.IKEA EKET cabinet anti-tip bracketA bracket that ties an EKET cube (35 × 35 cm) to the wall so a stacked tower cannot tip.UniFi Cloud Gateway Ultra wall mountA wall mount for a UniFi Cloud Gateway Ultra (141.8 × 127.6 × 30 mm) that holds it on edge with the ports facing down.GoPro motorcycle handlebar mount for 22.2 mm barsA handlebar clamp for 22.2 mm motorcycle bars that carries a GoPro on a three-prong mount (prongs about 3 mm thick, 5 mm bolt hole), set 30 mm above the bar…