1
Replacement parts
Sovol SV06 filament guide with 608 bearing
This is not a fixed STL. SpeakCAD generates the sovol sv06 filament guide with 608 bearing to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a filament guide with a 608 bearing pulley, 2.5 mm groove, PC4-M6 outlet for 4 mm PTFE, frame clip, for a Sovol SV06.
What a sovol sv06 filament guide with 608 bearing is
A filament guide for the top of a Sovol SV06 that routes filament from the spool holder to the extruder over a 608 bearing (22 × 8 × 7 mm) so it no longer rubs the frame or kinks as the X carriage moves. The pulley has a 2.5 mm groove, the outlet holds a 4 mm PTFE tube in a PC4-M6 hole, and the clip grips the top of the frame upright. Print in PETG on its side.
The SV06 Plus is taller, so the guide angle needs checking. Open the model in SpeakCAD for free, change the clip in the viewer or the chat, then download the STL.
People also search
sv06 filament guide stlsovol sv06 filament guidesv06 spool guide bearingsv06 filament guide 3d print
Questions people ask about a sovol sv06 filament guide with 608 bearing
A filament guide for the top of a Sovol SV06 that routes filament from the spool holder to the extruder over a 608 bearing (22 × 8 × 7 mm) so it no longer rubs the frame or kinks as the X carriage moves. The pulley has a 2.5 mm groove, the outlet holds a 4 mm PTFE tube in a PC4-M6 hole, and the clip grips the top of the frame upright. Print in PETG on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a filament guide with a 608 bearing pulley, 2.5 mm groove, PC4-M6 outlet for 4 mm PTFE, frame clip, for a Sovol SV06.
The SV06 Plus is taller, so the guide angle needs checking. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Combination-square head replacement 300 mmA replacement head for a 300 mm combination square with a 1 mm rule slot, a 45 degree face, and an M5 lock.IKEA POÄNG cushion tie clipA clip that replaces a snapped POÄNG cushion tie so the seat pad stays on the frame.Creality Ender-3 V3 SE spool holder with 608 bearingsA replacement spool holder hub for the top of an Ender-3 V3 SE that spins on two 608 bearings (22 × 8 × 7 mm) instead of plastic on plastic, which cuts under…Whirlpool fridge door shelf end capAn end cap for Whirlpool and Hotpoint fridge door shelves, the side piece that holds the shelf onto the door liner ribs.Roller blind idler end cap for 25 mm tubeAn idler end plug for roller blinds with a 25 mm tube, the non-chain end that carries the pin into the bracket.Curtain track glider setCurtain track gliders crack and stop sliding, leaving curtains bunched at one end, and matching the profile of an older track is rarely possible from a shop.