1
SpeakCAD for the Sovol SV06
Custom parts for the Sovol SV06: describe them, download G-code sliced for it
Sovol's open-source bed slinger in the MK3 mould, direct drive, 220 x 220 x 250 mm. SpeakCAD ships the Sovol SV06's own OrcaSlicer profile: describe a part in plain English, watch it render on a virtual 220 x 220 mm bed, edit it by chat, and download a .gcode file, ready for the SD card, the USB stick or the printer's own upload page. Or take the STL or 3MF to your usual slicer. Runs in Safari and Chrome, on a phone or a computer, nothing to install.
How it works
From a sentence to the SV06's SD card
The slicer runs on our side with the same profiles OrcaSlicer ships for the Sovol SV06. You choose the print profile and the filament; the printer settings are already right.2
Check it on the SV06's bed
The part renders on a virtual bed the size of the SV06's. The first render usually appears within a minute or two: a new part goes to the strongest models, which reason through the geometry, and small edits land in seconds. Turn it, tap a face to read a size, open the dimensions panel, and see whether it has overhangs that need supports. Anything wrong is one sentence to fix.3
Pick the Sovol SV06 and its profile
In the download dialog choose the Sovol SV06 (0.4 High-Speed nozzle, 0.4 nozzle), one of its print profiles (0.18 mm, 0.2 mm), a filament, then infill, walls, supports and adhesion. The printer and its last settings are saved to your account.4
Download and print
You get a .gcode file, ready for the SD card, the USB stick or the printer's own upload page, with the estimated print time and filament weight. Re-slicing a design you already downloaded does not spend the 10 credits again; without Pro or Unlimited each slice still spends 5 credits.The Sovol SV06 profile SpeakCAD slices with
| Setting | Value |
|---|---|
| Printer | Sovol SV06 (Sovol) |
| Printable area in the profile | 220 x 220 x 250 mm |
| Nozzle variants | 0.4 High-Speed nozzle, 0.4 nozzle |
| Layer heights in the print profiles | 0.18 mm, 0.2 mm |
| Filament profiles | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF, plus the OrcaSlicer filament library |
| Download | G-code, or STL and 3MF for your own slicer |
| Slicer | OrcaSlicer, run on our servers with the printer's official profile |
Prompts sized for the SV06
Copy one, change the numbers to yours. Each opens in the editor with the text already typed.“A filament guide with a 608 bearing for a Sovol SV06: clips on the 20 x 40 top extrusion, 4 mm PTFE hole, 2.4 mm walls, within 60 mm.”
Open this prompt in the editor“A nozzle storage block for the SV06: eight M6 threaded holes on a 15 mm grid, 20 mm thick, a magnet pocket 10 x 3 mm underneath, chamfered edges.”
Open this prompt in the editor“A phone stand for an 80 mm wide phone at 60 degrees with a 12 mm cable slot underneath and a 5 mm lip, printed flat on its back.”
Open this prompt in the editorWhy SV06 owners do not need a slicer on the phone
Slicing is the step that keeps 3D printing on the desktop: a design made anywhere still has to pass through Bambu Studio, PrusaSlicer or Cura on a computer. SpeakCAD runs OrcaSlicer on its own servers with the profile OrcaSlicer ships for the Sovol SV06, so the phone that typed the description also downloads G-code. The desktop slicer stays the better choice for arranging many parts on one bed or for exotic settings; for one part at a time, the download dialog covers the profile, the filament, infill, walls, supports and adhesion.
Parts that fit the SV06
The Sovol SV06's 220 x 220 mm bed and 250 mm height are what the virtual bed in the viewer shows, so a part that looks too big is too big. Ask for a part to be split into two halves with alignment pins when it does not fit, or for a flat print orientation when it would need supports. The examples above and the library parts below all fit.
Parts that fit the first time
The Sovol SV06 prints slightly differently from the next printer, which is why holes come out tight and lids loose. Fit Check cuts a five-minute test slice from the interface that must fit, you report too tight, perfect or too loose, and every model after that is built with the clearance your SV06 needs. The test slice downloads free as STL or 3MF. How Fit Check works.
Ready-made parts for the SV06 in the library
Sovol SV06 filament guide with 608 bearingA filament guide for the top of a Sovol SV06 that routes filament from the spool holder to the extruder over a 608 bearing (22 × 8 × 7 mm) so it no longer ru…Sovol SV06 nozzle storage blockA storage block for the M6 brass and hardened nozzles of a Sovol SV06, with twelve M6 threaded holes 8 mm deep, each labelled 0.2, 0.4, 0.6 or 0.8, and a 7 m…
Questions
Yes. The Sovol SV06 is one of the 380+ printers in the slicer catalog, with 2 nozzle variants and the print and filament profiles OrcaSlicer ships for it. Pick it in the download dialog and download G-code; it is saved to your account for next time.
No. SpeakCAD slices on its servers and gives you a .gcode file. Copy it to the SD card or USB stick the SV06 takes, or upload it through the printer's own web page or app. If you prefer your own slicer, download the STL or 3MF instead.
The print profile (layer height and speed presets from the Sovol SV06's profile), the filament profile (the printer's own and the OrcaSlicer library: Generic PLA, PETG, ABS, ASA, TPU, carbon-fibre blends and hundreds of branded filaments), infill, wall count, supports and bed adhesion. Nozzle temperature, bed temperature and speeds come from the profiles you pick.
The virtual bed in the viewer is sized from the Sovol SV06's profile (220 x 220 mm), so you see it before slicing. Ask for the part to be split into two pieces with alignment pins or a dovetail, or for a different orientation; each is one sentence.
Sliced downloads are included in Pro ($9.99 a month, 200 credits) and Unlimited ($24.99 a month); with Starter credits ($5 once for 75 credits, no subscription) a sliced download spends 5 credits on top of the usual 10. Re-slicing a design you already downloaded does not spend the 10 credits again; without Pro or Unlimited each slice still spends 5 credits. STL and 3MF downloads are always available.
Yes. The editor runs in Safari on iPhone and iPad and in Chrome on Android; the file lands in Files or Downloads, ready for the card or the printer's app. The same project opens later on a desktop.
Read more
All 380+ printersEvery printer the slicer has a profile for, by brand.From a phone to the slicerGetting the file from Files or Downloads onto the printer.Exporting to slicersSTL vs 3MF, units, and what the slicer does with the file.The AI 3D editor on your phoneDescribe, render, edit and download from a phone browser.From a ChatGPT description to a filePaste the spec ChatGPT wrote and get the file it could not make.