1
Organizers & storage
Sovol SV06 nozzle storage block
This is not a fixed STL. SpeakCAD generates the sovol sv06 nozzle storage block to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a nozzle storage block, 80×40×14 mm, twelve M6 threaded holes 8 mm deep, size labels, 7 mm hex wrench slot, two 10×3 mm magnet pockets.
What a sovol sv06 nozzle storage block is
A storage block for the M6 brass and hardened nozzles of a Sovol SV06, with twelve M6 threaded holes 8 mm deep, each labelled 0.2, 0.4, 0.6 or 0.8, and a 7 mm hex wrench slot. The block is 80 × 40 × 14 mm with a magnetic base pocket for two 10 × 3 mm magnets so it sticks to the printer frame. Print in PETG with the holes up.
The Bambu Lab A1 uses whole quick-swap hotends, not M6 nozzles, so this block is for SV06-style hotends. Open the block in SpeakCAD for free, change the number of holes in the viewer or the chat, then download the STL.
People also search
sv06 nozzle holder stlm6 nozzle storage blocksovol nozzle organizernozzle holder 3d print
Questions people ask about a sovol sv06 nozzle storage block
A storage block for the M6 brass and hardened nozzles of a Sovol SV06, with twelve M6 threaded holes 8 mm deep, each labelled 0.2, 0.4, 0.6 or 0.8, and a 7 mm hex wrench slot. The block is 80 × 40 × 14 mm with a magnetic base pocket for two 10 × 3 mm magnets so it sticks to the printer frame. Print in PETG with the holes up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a nozzle storage block, 80×40×14 mm, twelve M6 threaded holes 8 mm deep, size labels, 7 mm hex wrench slot, two 10×3 mm magnet pockets.
The Bambu Lab A1 uses whole quick-swap hotends, not M6 nozzles, so this block is for SV06-style hotends. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Gridfinity bin for SDS-plus drill bitsA 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 6 units tall) for SDS-plus masonry bits, whose shanks are 10 mm across.Raspberry Pi HAT storage rack with labelled slotsA vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.Fujifilm X100VI 49 mm filter and lens cap holderA desk or bag organizer for the small kit that the Fujifilm X100VI and X100V accumulate: the AR-X100 adapter ring, two or three 49 mm filters and the slip-on…Framework 16 input-module trayA tray that stores two Framework 16 input modules (numpad, RGB macropad) in 130 × 70 mm wells.Keychron K2 HE travel-case insertAn insert that keeps a K2 HE (about 315 × 128 × 40 mm) from sliding in a sleeve, with a 317 × 130 mm well and a 20 mm cable trough.Insta360 X4 travel case insertAn insert that turns a small box into a travel case for an Insta360 X4 (46 × 123.6 × 37.6 mm) and its kit.