VESA 75 dash screen bracket for a sim rig
A bracket that stands a small dash screen with a VESA 75 pattern on a 40 series aluminium profile, behind the wheel of a sim rig. The upright has four 4.5 mm holes on a 75 × 75 mm square for M4 screws and a 30 mm cable hole, leans back 15 degrees and keeps the lowest screws 50 mm above the profile; the foot takes two M8 bolts 40 mm apart. Upright and gussets are 5 mm thick, the foot 6 mm. It prints with the upright flat on the bed, without supports, and is meant for a light dash screen, not a full monitor. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.No ready-made model for this part yet
Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.Adjust
Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).Example prompt
Create a bracket that mounts a small dash screen with a VESA 75 pattern on a 40 series aluminium profile. Upright 95 mm wide, 135 mm tall and 5 mm thick; in its upper part four 4.5 mm holes on a 75 × 75 mm square for M4 screws, centred 47.5 mm below the top edge, and a 30 mm cable hole in the middle of the pattern. Foot 95 × 40 × 6 mm behind the lower edge with two 8.4 mm holes for M8 bolts, 40 mm apart, centred. The upright leans back 15 degrees over the foot, braced by two triangular gussets 5 mm thick at the outer edges. Print with the upright flat on the bed, no supports.
Fit notes
Portable monitors and telemetry screens differ in where the pattern sits and how tall they are, so a fixed bracket leaves the screen hidden by the wheel rim or too low to read. VESA 100 needs a 120 mm wide upright. In SpeakCAD you set the pattern, the height above the profile and the lean.
Questions people ask about a VESA 75 dash screen bracket for a sim rig
A bracket that stands a small dash screen with a VESA 75 pattern on a 40 series aluminium profile, behind the wheel of a sim rig. The upright has four 4.5 mm holes on a 75 × 75 mm square for M4 screws and a 30 mm cable hole, leans back 15 degrees and keeps the lowest screws 50 mm above the profile; the foot takes two M8 bolts 40 mm apart. Upright and gussets are 5 mm thick, the foot 6 mm. It prints with the upright flat on the bed, without supports, and is meant for a light dash screen, not a full monitor.
There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.
SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.
A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.