1
Enclosures & cases
Sim racing button box with toggles and rotary encoders
This is not a fixed STL. SpeakCAD generates the sim racing button box with toggles and rotary encoders to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a sim racing button box, 220×120×60 mm with 12 degree slope, six 6 mm toggle holes, four 7 mm encoder holes, four 19 mm button holes.
What a sim racing button box with toggles and rotary encoders is
A button box face for sim racing with six 6 mm holes for miniature toggle switches, four 7 mm holes for EC11 rotary encoders, four 19 mm push buttons and a 12 mm hole for a start switch. The box is 220 × 120 × 60 mm with a 12 degree slope, 2.5 mm walls, a Pro Micro or ESP32 bay and anti-rotation notches next to each toggle. Print the face down in PETG.
Larger toggle switches with a flip cover need 12 mm holes. Open the ready-made box in SpeakCAD for free, change the layout in the viewer or the chat, then download the STL.
People also search
button box with toggles stlsim racing rotary encoder box 3d printdiy sim rig button boxflight sim button box case
Questions people ask about a sim racing button box with toggles and rotary encoders
A button box face for sim racing with six 6 mm holes for miniature toggle switches, four 7 mm holes for EC11 rotary encoders, four 19 mm push buttons and a 12 mm hole for a start switch. The box is 220 × 120 × 60 mm with a 12 degree slope, 2.5 mm walls, a Pro Micro or ESP32 bay and anti-rotation notches next to each toggle. Print the face down in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a sim racing button box, 220×120×60 mm with 12 degree slope, six 6 mm toggle holes, four 7 mm encoder holes, four 19 mm button holes.
Larger toggle switches with a flip cover need 12 mm holes. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
USB-C PD trigger board caseA sleeve for a small USB-C PD trigger board (about 28 × 11 mm) that asks a charger for 9, 12, 15 or 20 V.SHT31 and ESP32-C3 wall sensor caseA flat wall case for an SHT31-D breakout (most are under 20 × 15 mm) and an ESP32-C3 SuperMini (22.5 × 18 mm), with the sensor in a vented chimney below the…Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.Wemos D1 Mini enclosure with DHT22 sensor slotA wall-mountable box for a Wemos D1 Mini (34.2 x 25.6 mm) with a dedicated slot for a DHT22 temperature and humidity sensor.ESP32-S3 SuperMini case with USB-CA snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents.Arduino Mega 2560 caseA case for an Arduino Mega 2560 R3 (101.5 × 53.3 mm).